Home Companies Zhejiang Canaan Kaixinlong Technology Co., Ltd.

Feeding Pellet Automatic Capsule Filling Machine 5.6Kw High Tech Technology

Zhejiang Canaan Kaixinlong Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Zone C No. 2, Wandong Intelligent Manufacturing Industrial Park, 999 Wentao Road, Ruian Economic Development Zone, Ruian City.Zhejiang.China

Contact name:Cai

Inquir Now

Zhejiang Canaan Kaixinlong Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Feeding Pellet Automatic Capsule Filling Machine 5.6Kw High Tech Technology

Country/Region china
City & Province zhejiang
Categories Plastic Extruders
InquireNow

Product Details

Overview of the machine:

High-Tech Pharmaceutical Machine Pharmaceutical Machine Pharmaceutical Technology Pellet Filling Machine


The CFK-1250 series capsule filling machine designed and produced by our factory has been improved and innovated for many times in the original models, which is the preferred equipment for hospitals or small and medium-sized pharmaceutical factories, replacing the original semi-automatic capsule filling equipment.
The whole machine adopts intermittent rotary mechanism and quantitative dose filling. Suitable for 00 # -5 # capsule powder and pellets filling, and can be selected with automatic bag delivery machine, vacuum feeding machine, gold inspection machine, polishing machine, hoist and other auxiliary equipment.
 

 

Technical parameters:

 

Output1250Capsules/min
No.of segment bores9
Suitable fof capsule00#-5#
Total power5.6Kw(Standard configuration)
Overall weight1200Kgs
Overall diemensions1085+(435)mm*1015(+252)mm*1880mm
Noise≤75DB(A)
Pressure0.4 ~ 0.7Mpa
Air consumption≤6m³
Vacuum-0.03 ~ -0.06Mpa
Filling error±2.5%~±5%

 

The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.

 

 

 

Sort of empty capsule:
 
principle
The seeding tube is equipped with multiple circular holes and communicate with the capsule hopper, and the channel is equipped with capsule tablets.
The seeding sac tube slides up and down to drop the empty capsule into the pore channel. When the seeding capsule tube goes up, the capsule piece will jam the capsule. When the seeding tube falls down, the capsule holder rotates and drives the capsule to release the capsule, and the capsule falls out of the hole.

 

 

 
Filling-type metering filling:

A-f represents the punching rod of each group, during the interval after the interval time the angle. The powder in the measuring plate mold hole is compacted by each group punching rod once. When the charging rod is lifted from the die hole, the powder box rotates, and the powder on the metering plate will automatically fill the remaining space in the die hole. Fill once, compaction once, until the sixth time, the punching rod will poke the powder column in the mold hole out of the measuring plate, so that it will fall into the empty capsule below, complete the filling work.
Use the relative movement between the scraping powder block and the measuring plate to scrape the excess powder on the surface of the measuring plate to ensure the measurement requirements of the powder column.
The characteristics of the packing-type measurement method
1. The loading amount is accurate, and the difference of the loading amount of> 0.3g is controlled within ± 3%.
2. Adjust the lifting height of the punching rod to fine-tune the dose of drug filling.

 


 

Finished capsule discharge station:

 

Use
The finished capsules will be pushed out for collection.
Principle
The main component of the device is a discharge top rod that can reciprocate up and down. When the upper and lower modules carrying the closed capsule are rotated above the exit station and stopped, the capsule is pushed out of the module hole. The capsule was then blown into the outgoing hopper and slid into the stock barrel.

 

Capsule feeding method:

 

 

Feeding manually:

 

1.The capsule was manually added to the capsule bucket.
2.Applicable for smaller batch production

 

Automatic transfer of empty capsule(option)

 

The bottom capsule delivery tube is connected to the compressed air, and the automatic capsule delivery machine delivers the capsule to the capsule bucket, without the need for manual capsule addition.
Automatic bag delivery machine is easy to operate, can automatically start and stop feeding, to ensure the continuity of the machine operation.

 


 

The smooth drive system:


1.The DF110 and DF80 type grading box combination are used to make reasonable adaptation. Greatly improves the stability and service life of the machine.
2.Improve the transmission cam of all stations, use high quality special steel to make the inner groove wheel drive, eliminate the disadvantages of spring pulling easy fatigue and fracture, and wear resistance, stable operation.
3.The new layout design of the mechanical transmission part and with the "inner cam" instead of the traditional "lever" filling transmission mechanism, so that the machine runs more quiet and stable.
Indexing boxTransmission partInside groove cam

 

 

Hot Products

Overview of the machine: Powder Capsule Filling Machine High Speed Capsule Filling Machine Capsule ...
Overview of the machine: High Speed Capsule Filling Machine Pharmaceutical Equipment Capsule ...
Overview of the machine: High Speed Capsule Filling Machine Pharmaceutical Equipment Capsule ...
Overview of the machine: Capsule Filling Machine Manufacturer Powder Capsule Filling Machine ...
Overview of the machine: High-Tech Pharmaceutical Machine Pharmaceutical Machine Pharmaceutical ...
Overview of the machine: Pharmaceutical Technology Pellet Filling Machine Automatic Capsule Filler ...