Home Companies Zhejiang Canaan Kaixinlong Technology Co., Ltd.

Industrial 8Kw Automatic Powder Capsule Filling Machine Types For Pharmaceutical

Contact Us

[China]

Trade Verify

Address: Zone C No. 2, Wandong Intelligent Manufacturing Industrial Park, 999 Wentao Road, Ruian Economic Development Zone, Ruian City.Zhejiang.China

Contact name:Cai

Zhejiang Canaan Kaixinlong Technology Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Industrial 8Kw Automatic Powder Capsule Filling Machine Types For Pharmaceutical

Country/Region	china
City & Province	zhejiang

Product Details

Overview of the machine:

Industrial Capsule Filling Machine For Pharmaceutical Factory Capsule Powder Fill Filling

CFK-1500 series capsule filling machine is an automatic capsule filling machine developed by our company by absorbing the advanced technology at home and abroad. The equipment is beautiful in shape, smooth operation, low noise, easy to operate and easy to clean.

The whole machine adopts intermittent rotary mechanism and quantitative filling. Suitable for 00 # -5 # capsule powder and particle filling, and can be equipped with automatic bag feeding machine, vacuum feeding machine, gold inspection machine, polishing machine, hoist and other auxiliary equipment.

Technical parameters:

Output	1500Capsules/min
No.of segment bores	11
Suitable fof capsule	00#-5#
Total power	8Kw(Standard configuration)
Overall weight	1400Kgs
Overall diemensions	1230mm×1175(+382)mm×1955mm
Noise	≤75DB(A)
Pressure	0.4 ~ 0.7Mpa
Air consumption	≤6m³
Vacuum	-0.03 ~ -0.06Mpa
Filling error	±2.5%~±5%

The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.

Sort of empty capsule:

principle

The seeding tube is equipped with multiple circular holes and communicate with the capsule hopper, and the channel is equipped with capsule tablets.

The seeding sac tube slides up and down to drop the empty capsule into the pore channel. When the seeding capsule tube goes up, the capsule piece will jam the capsule. When the seeding tube falls down, the capsule holder rotates and drives the capsule to release the capsule, and the capsule falls out of the hole.

Orientation of the empty capsule:

Broadcast description

The capsule head always acts in the middle of the capsule body, and the capsule head pushes the capsule to make a U-turn movement, which always pushes the capsule body to the edge of the capsule comb, and then presses the capsule head down to turn the capsule over and push it vertically into the module hole.

principle

1. The thrust point of the capsule head is on the capsule body;

2. The width of the chute is smaller than the outer diameter of the capsule cap, which is larger than the outer diameter of the capsule body. It only has a tightness effect on the capsule cap and does not contact with the capsule body.

Orientation of the empty capsule

Body cap separation of the empty capsule:

principle

When the empty capsule enters the module hole, the vacuum suction seat rises and is tightened with the lower module. Because the diameter of the small hole of the upper and lower module steps is less than the diameter of the capsule cap and the capsule body respectively; when the vacuum is connected, the capsule body is sucked into the lower module hole, the steps in the upper module die hole block the capsule cap down, and the empty capsule cap is separated.