Home Companies Zhejiang Canaan Kaixinlong Technology Co., Ltd.

Pharmaceutical Medical Capsule Filling Machine Supplier Automatic Capsule Filler

Contact Us

[China]

Trade Verify

Address: Zone C No. 2, Wandong Intelligent Manufacturing Industrial Park, 999 Wentao Road, Ruian Economic Development Zone, Ruian City.Zhejiang.China

Contact name:Cai

Zhejiang Canaan Kaixinlong Technology Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Pharmaceutical Medical Capsule Filling Machine Supplier Automatic Capsule Filler

Country/Region	china
City & Province	zhejiang

Product Details

Overview of the machine:

Automatic Capsule Filler High Quality Capsule Filling Machine Medical Device Capsule Powder

CFK-3500 series capsule filling machine is an automatic capsule filling machine developed by our company by absorbing the advanced technology at home and abroad. The equipment is beautiful in shape, smooth operation, low noise, easy to operate and easy to clean.

The whole machine adopts intermittent rotary mechanism and quantitative filling. Suitable for 00 # -5 # capsule powder and particle filling, and can be equipped with automatic bag feeding machine, vacuum feeding machine, gold inspection machine, polishing machine, hoist and other auxiliary equipment.

Technical parameters:

Output	3500Capsules/min
No.of segment bores	25
Suitable fof capsule	00#-5#
Total power	11.5Kw(Standard configuration)
Overall weight	2200Kgs
Overall diemensions	1435(+550)mm×1248(+280)mm×1960mm
Noise	≤80DB(A)
Pressure	0.4 ~ 0.7Mpa
Air consumption	≤12m³
Vacuum	-0.03 ~ -0.06Mpa
Filling error	±2.5%~±5%

The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.

Orientation of the empty capsule:

Broadcast description

The capsule head always acts in the middle of the capsule body, and the capsule head pushes the capsule to make a U-turn movement, which always pushes the capsule body to the edge of the capsule comb, and then presses the capsule head down to turn the capsule over and push it vertically into the module hole.

principle

1. The thrust point of the capsule head is on the capsule body;

2. The width of the chute is smaller than the outer diameter of the capsule cap, which is larger than the outer diameter of the capsule body. It only has a tightness effect on the capsule cap and does not contact with the capsule body.

Orientation of the empty capsule

Body cap separation of the empty capsule:

principle

When the empty capsule enters the module hole, the vacuum suction seat rises and is tightened with the lower module. Because the diameter of the small hole of the upper and lower module steps is less than the diameter of the capsule cap and the capsule body respectively; when the vacuum is connected, the capsule body is sucked into the lower module hole, the steps in the upper module die hole block the capsule cap down, and the empty capsule cap is separated.

Filling-type metering filling:

A-f represents the punching rod of each group, during the interval after the interval time the angle. The powder in the measuring plate mold hole is compacted by each group punching rod once. When the charging rod is lifted from the die hole, the powder box rotates, and the powder on the metering plate will automatically fill the remaining space in the die hole. Fill once, compaction once, until the sixth time, the punching rod will poke the powder column in the mold hole out of the measuring plate, so that it will fall into the empty capsule below, complete the filling work.

Use the relative movement between the scraping powder block and the measuring plate to scrape the excess powder on the surface of the measuring plate to ensure the measurement requirements of the powder column.

The characteristics of the packing-type measurement method

1. The loading amount is accurate, and the difference of the loading amount of> 0.3g is controlled within ± 3%.

2. Adjust the lifting height of the punching rod to fine-tune the dose of drug filling.