|
[China]
Trade Verify
Address: Zone C No. 2, Wandong Intelligent Manufacturing Industrial Park, 999 Wentao Road, Ruian Economic Development Zone, Ruian City.Zhejiang.China
Contact name:Cai
Zhejiang Canaan Kaixinlong Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Overview of the machine:
Automatic Capsule Filler Capsule Filling Machine Manufacturer Powder Capsule Filling Machine High Speed Capsule Filling
Technical parameters:
| Output | 5000Capsules/min |
| No.of segment bores | 36(Three rows) |
| Suitable fof capsule | 00#-5# |
| Total power | 15Kw(Standard configuration) |
| Overall weight | 3200Kgs |
| Overall diemensions | 1605(+530)mmX1285(+285)mmX2091mm |
| Noise | ≤80DB(A) |
| Pressure | 0.4 ~ 0.7Mpa |
| Air consumption | ≤15m³ |
| Vacuum | -0.03 ~ -0.06Mpa |
| Filling error | ±3%~±7% |
The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.
Rejection station:
Use Some empty capsules may keep the body cap still for some reason,
and remain in the upper module hole; to prevent mixing into the
finished product, they are removed before the capsule is closed. Principle A push hand that can reciprocate up and down, located between the
upper module and the lower module, with a thimble hand. When the
upper and lower modules rotate, the push hand stops at the lower
limit position and the thimble breaks away from the upper module.
When the module stops at this station, the push hand goes up and
the thimble mounted on the push hand is inserted into the upper
module hole. ①. If there is a pulled out capsule cap in the upper mold hole, the
upward top has no impact on the capsule cap. ②. If there is an open empty capsule in the upper mold hole, the
upper module is pushed out by the upward thimble and sucked into
the air chamber. |  |
Locking station:
Use Lock the capsule of the push rod to meet the requirements of the
finished product. Principle The upper and lower modules are rotated to the lock, when the axis
of the upper and lower modules overlap. The upper baffle above the
module begins to move against the top bar below. The upper baffle
presses the capsule cap, the top rod rises, and the capsule cap
body is closed and locked |  |
Material feeding method:
 |  |  |
| Manual feeding | Lifter feeder(option) | Vacuum feeder (option)
|
1.Add the material to the hopper manually. 2.Large dust, high labor intensity. 3.No cost, to adapt to the smaller batch production | 1.Through the transition feeding pipe, with a soft connection. 2.The feeding process is closed, no dust overflow, safety and
health. 3.Adapt to the mixture of materials, can control to solve the
problem of material stratification. | 1.Compact structure, tight, no dust pollution, safety and health,
low noise. 2.Simple installation, easy to operate, the transport is well
adapted to the requirements of the filling machine. 3.Applicable to the 2.7m storey-high clean workshop. |
