Zhejiang Canaan Kaixinlong Technology Co., Ltd. |
Verified Suppliers
|
|
Overview of the machine:
Automatic Capsule Filling Machine NJP-5000C Introduction Of Product Automatic Capsule Filler
Technical parameters:
Output | 5000Capsules/min |
No.of segment bores | 36(Three rows) |
Suitable fof capsule | 00#-5# |
Total power | 15Kw(Standard configuration) |
Overall weight | 3200Kgs |
Overall diemensions | 1605(+530)mmX1285(+285)mmX2091mm |
Noise | ≤80DB(A) |
Pressure | 0.4 ~ 0.7Mpa |
Air consumption | ≤15m³ |
Vacuum | -0.03 ~ -0.06Mpa |
Filling error | ±3%~±7% |
The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.
The process of capsule filling:
The smooth drive system:
Indexing box | Transmission part | Inside groove cam |
Closed station turntable:
1.Use the imported silicone sealing ring to reduce the condition
that the powder is brought into the turntable due to the expansion
of the movement axis, and smooth operation, high accuracy;
2.It solves the complicated problem of installing and dismantling
the mold, reduces the labor intensity of the staff, and strengthens
the service life of the station rotary table.
Three-dimensional adjustment mechanism:
Easy to remove the hopper:
The old hopper, loosen the hand wheel on the supporting column when
disassembly and cleaning, and stretch on the long pressure spring
in the column. Most of the hopper must be extended out of the upper
Plexiglass to be removed. During the installation, the pressure
spring needs to be squeezed to the bottom before tightening the
hand wheel, and the employees need to spend a lot of effort to
operate. | |
A screw was added to the supporting post, the screw passed through
the panel, the top connecting the hopper support, and the motor and
turbine box were installed at the bottom. During hopper disassembly
and installation, the whole lifting process can be operated on the
PLC operation panel. Due to the use of a single screw support, the
work when there is a slight shaking phenomenon. | |
The split structure is directly fixed on the lower plane of the
roof, with simple structure, stable and reliable when working, and
convenient hopper disassembly. Release the fast interface of the
material cylinder, then loosen the four screws on the hopper, then
rotate out the small pin on the paddle, you can horizontally pan
out of the filling part. |
Copper collar:
1.Hard column: stable particle weight, loading amount close to the
maximum value, one or two groups of filling rods have obvious
beating, the adjustment range is too small, the machine load is
large, the corresponding parts wear fast. 2.Soft column: stable grain weight, large adjustment range, small
load, small wear of parts. Half column: sometimes appear puff powder particle weight and
light. 3.Scattered sand: leakage, dirty machine table, installation
difference. The gap type copper ring can be replaced with the
sealing type. | |
According to the material situation, the company provides the
optional replacement copper ring |
Vacuum separation mechanism:
Modular powder filling mechanism:
Other performance: