|
[China]
Trade Verify
Address: Zone C No. 2, Wandong Intelligent Manufacturing Industrial Park, 999 Wentao Road, Ruian Economic Development Zone, Ruian City.Zhejiang.China
Contact name:Cai
Zhejiang Canaan Kaixinlong Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Overview of the machine:
High Quality Capsule Filling Machine Capsule Filling Machine Manufacturer Powder Capsule Filling Machine
Technical parameters:
| Output | 2500Capsules/min |
| No.of segment bores | 18 |
| Suitable fof capsule | 00#-5# |
| Total power | 8Kw(Standard configuration) |
| Overall weight | 1650Kgs |
| Overall diemensions | 1230mm×1175(+382)mm×1955mm |
| Noise | ≤75DB(A) |
| Pressure | 0.4 ~ 0.7Mpa |
| Air consumption | ≤9m³ |
| Vacuum | -0.03 ~ -0.06Mpa |
| Filling error | ±2.5%~±5% |
The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.
Locking station:
Use Lock the capsule of the push rod to meet the requirements of the
finished product. Principle The upper and lower modules are rotated to the lock, when the axis
of the upper and lower modules overlap. The upper baffle above the
module begins to move against the top bar below. The upper baffle
presses the capsule cap, the top rod rises, and the capsule cap
body is closed and locked |  |
Cleaning station:
Use The cleaning unit cleans the module for access to the next cycle. Principle When the upper and lower modules are dragged under the main working
plate and parked at the cleaning station, they are placed at the
gap of the cleaning device. At this time, the compressed air is
opened, and the powder in the mold hole and the broken skin are
blown out of the mold hole from the lower direction of the lower
module. The vacuum suction system placed above the mold hole draws
it into the vacuum cleaner to keep the mold hole clean and to
facilitate the next cycle operation. |  |
