GST506 High quality high pressure 1/4" connector car washing cleaning foam gun foam lance

GST506 High quality high pressure 1/4" connector car washing cleaning foam gun foam lance​

Tech Specs

Required Electric or Gas Pressure Washer Minimum 800 PSI; Maximum 4,000 PSI; Never Exceed 5,000 PSI Minimum 1.4 GPM; 2.0 GPM recommended; Never Exceed 5.3 GPM Soap Solution Bottle Capacity: 32 US oz. 

Universal Pressure Washer Fit
The Foam Cannon Max Foam 8 works with any pressure washer design. It uses a standard universal thread that easily accepts any universal pressure washer attachment fitting. If the included fittings does not fit your pressure washer wand, consult the pressure washer manufacturer for the correct fitting attachment.

Pressure Washer Attachment
The Max Foam 8 Foam Cannon ships with a standard ¼’’ Quick-Connect Plug Quick release connects Foam Cannon to pressure washer wand Screws directly into foam cannon unit (add some Teflon tape for watertight seal.) The Foam Cannon accepts any ¼’’ male attachment fittings.

How It Works

Professional detailers and hardcore enthusiasts wash dirt from cars as gently as possible.

The wrong touch pushes dirt around and grinds ugly scratches and swirls into the shiny finish.

The Professional Foam Cannon Max Foam 8 adds a blanket of super-slick and slippery car wash suds to lubricate any abrasive dirt particles.

Prepare the  Foam Cannon by filling the soap solution tank with water, then add 1 - 3 ounces of your favorite Chemical Guys car wash soap.

Gently rinse down the car with water to remove any loose debris and grime, then attach the Foam Cannon Max Foam 8 and cover the car with soapy suds.

Fine tune the soap mixture knob to the desired foam thickness, and adjust the front fan nozzle to the perfect spread to quickly cover any vehicle.

The bubbly soap begins to break down and lift stuck-on dirt and grime from the surface of the vehicle, surrounding it in slick car wash soap lubricants.

As the foam slides down, it gently pulls the dirt to the ground before the detailer even touches the surface with a wash mitt.

Add the TORQ Professional Foam Cannon Max Foam 8 to any two-bucket car wash, and drastically reduce the chances of installing any swirls or scratches during any car wash or full detail.