Electric Aseptic Beverage Filling Machine , Pure Water Filling
Machine For Plastic Bottle
Introduction:
1. Magnetic torque is used for screw capping,and the power of screw
capping can be adjusted steplessly. Capping is reliable and do no
harm to the caps.
2. All parts that directly contacting with water are made of high
stainless steel. The critical electrical components are from famous
international companies, such as mitsubishi, omron and other famous
brands.
3. The mineral water filling machine is consisted of
ringsing-filling-caping all together.
4. The new generation of stainless steel grab is adopted and the
grabs have no contact with the arew above the bottle's screw
thread. Nozzles in the grab can guarantee the complete wash of the
interior of the bottle.
5. The advanced gravity filling technology used in this machine
makes the filler quick,steady and accurate.
Technical Parameter
Model | 24-24-24-8 | 32-32-32-10 | 40-40-40-12 |
Number of Sterilizing Head | 24 | 32 | 40 |
Number of Rinsing Head | 24 | 32 | 40 |
Number of Filling Head | 24 | 32 | 40 |
Number of Capping Head | 8 | 10 | 12 |
Rated Production Capacity | 10000BPH | 12000BPH | 16000BPH |
Installed Capacity:(kw) | 6.5 | 8.7 | 9.5 |
Overall Size L*W*H(mm) | 4070*2350*2400 | 5100*2600*2400 | 6250*3050*2400 |
Rinsing part
1) The rotary wheel is a fully AISI304 stainless steel welded
structure.
2) The machine applies unique overturning bottle clamp, which is an
innovation of our company. This bottle clamp grips bottle at neck
position, avoiding bottle mouth thread contamination caused by
rubber gripper block of a traditional bottle clamp. Made of AISI304
stainless steel, this bottle clamp is hygienic and durable.
3) The high efficiency atomizing spray nozzle installed on bottle
clamp incorporating technology from Spaying Systems Co. Ltd., is
capable of cleaning any part of bottle inner wall, and also saves
rinsing water. Covering of bottle clamps and elevator are product
of IGUS
Filling part
1) The filler is designed and manufactured with application of
Italy technology, providing
hardware guarantee for securing product quality and reducing loss.
2) Rotary wheel are fully made of stainless steel AISI304.
3) Filling valves are designed and manufactured with German
technology, made of AISI316L, featuring high filling accuracy and
high filling speed.
Capping part
1) The capper is most precise part in 3 in 1 filling machine,
because the quality of machine ism important to running credibility
and product quality.
2) The cover track has the device to prevent the reversal cover
from passing and pick out the reversal cover. Meanwhile the
photoelectric switch can stop the machine automatically when there
is no cover on the track, by which it can avoid bottle without
cover effectively.
![](http://img.everychina.com/nimg/ac/ec/e34cae07acb50b150e49ffac7d20.jpg)
Standard bottled water processing line is as following:
1). The raw water will be purified and sterilized after passing
through the water treatment system, and will be stored in the
purified water storage tank;
2). Automatic bottle blow molding machine is connected with the
water filling machine by the Air conveyor
3). Purified water will be pumped into the water filling machine;
At the same time, empty bottles pass through the rinsing, filling
and capping 3-in-1 monoblock, the bottles will be rinsed, filled
and capped.