Active Member
|
[China]
Address: 1st Floor, No. A, Heping Industrial Park, No. 77, Changyong Road, Longhua Street, Longhua District, Shenzhen, Guangdong Province
Contact name:Cherry
Jucai Industrial (Shenzhen) Co., Ltd. |
|
|
380V 20 HP Rotary Screw Air Compressor With Dryer No Fuel Integrated
20HP 15KW 16bar Newest no fuel Integrated air compressor screw mini air compressors for laser cutting
Product Specifications
| Model | JCG20 |
| Flow m³/min | 1.28 |
| Pressure bar | 16 |
| Power (kw/hp) | 20/15 |
| Starting mode | Variable frequency starting |
| Volt/Hz | 380V/190~327Hz |
| Dimension (L x W x H mm) | 1855 x820 x 1695 |
| Weight (kg) | 410 |
Full performance screw air compressor is a screw compressor, refrigeration dryer, precision filter, cylinders and other components integrated in one. Users easy to install, simple to use, mobile and flexible. After the air through an integrated system, the air quality was optimized to meet the needs of each enterprise processes.
Compressed air as auxiliary gas:
For carbon steel plates, when compressed air is used as the
auxiliary gas for cutting, the section of the part will generate
relatively small burrs. The burrs are not sharp, and can be applied
to parts that do not require high cutting surface.
Stainless steel plate, compressed air is used as auxiliary gas. After the material is processed, the cutting surface will be oxidized. When the cutting section is welded, the oxide will produce slag and pores in the weld bead, which will affect the quality of the weld and cause the strength of the welded part to decrease. Therefore, if the compressed air is used as an auxiliary gas for cutting, and the parts need to be welded after cutting, the oxide layer of the welded part needs to be polished to improve the welding quality; in addition, the oxidation of the cutting surface will become a yellow oxide layer, When re welding, the oxide layer needs to be polished.
Aluminum plate and aluminum alloy plate, which uses compressed air as auxiliary gas, will reduce the cutting burr; if using nitrogen, the cutting burr will increase.
The intelligent controller of Chinese&English interface supervises the operation of the compressor in real time. Its auto warning protection function solves the problems of short-circuit,missing phase,overload or else.If the abnormal condition exits after checking the multi-point temperature and pressure,it will alarm and shut downautomatically.
The equipment up-time and state is recorded to remind the equipment to make a repair and maintain. According to the gas consumption,it can control the discharge rate to distinct energy-saving effectg.
Cooler
A huge design of cooler volume to discharge 35% margin.As a result, a machine can operate at high temperature and avoid the phenomenon of carbon deposit caused by the high temperature of the compressor.
Electrical components
Electrical components are made by the world famous brands,Schneider and Siemens which use silver contact to make it possible to operate more thanthree million times and ensure the longtermuse safety.
Hanzhong powerful host
low energy consumption, low noise. Stable and reliable, cutting more smooth, more flat section.
High efficiency inverter
Huichuan brand strength guarantee, the global compressor industry
high-end preferred.
High efficiency copper motor
IP54, insulation class F, B temperature, continuous operation
design.
16 kg gas supply
It can provide 16 kg of continuous constant pressure gas, eliminate
the pressure difference between loading and unloading, and improve
operation efficiency.
361-418V wide voltage design
The voltage adapts to a wide range to ensure continuous energy
supply.
Standard high efficiency dryer
The air quality is high, the pressure dew point is guaranteed, and
the laser lens and cutter head are protected.
Italian brand filter
Provide a clean air source for laser cutting, effectively protect
the cutting lens, reduce pressure difference
and reduce energy consumption.
FAQ
Q1: What is your product ?
A: Our products includes Piston air compressor; Screw air
compressor; Air cooling type compressed air dryer; Air tank; air
compressor pump; Air compressor parts.
Q2:Where is your factory located?
A: We are manfacturer, we have office in Shenzhen, and our factory
is located in Huizhou Duangdong which nears Shenzhen YANTIAN port
and Shenzhen Shekou Port about 2 hours.
Q3:How many air compressor do you produce every year?
A: We can produce 50000set everyday.
Q4: Can you provide sample?
A: Yes, we can provide you sample, but you need to pay for the
sample and freight firstly.
Q5: Can you use our brand?
A: Yes, OEM is available. The M.O.Q can be confirmed base on your
request.
