Tungsten Carbide Dies are used to draw ferrous and non-ferrous
materials, but normally used in steel wire and bar applications.
Our process assures the die better wear resistance and highly
polished finish.
Features:
● High quality alternative for steel wire and bar
● Better wear resistance
● Highly polished finish
● Fine tolerances
● Low cost
● Hole diameters: 0.40 - 60.00 mm
Standard Round Die Specifications
Inch | Type | Nib | Casing | Dia. | Ht. | Dia. | Ht. | R2 | .325 | .330 | 1 | .563 | R3 | .450 | .380 | 1.5 | .750 | R4 | .500 | .450 | 1.5 | .875 | R5 | .625 | .600 | 2 | .875 | R6 | .710 | .700 | 3 | 1.125 | R7 | .768 | .768 | 3 | 1.375 | R8 | 1.000 | .820 | 3 | 1.750 | R9 | 1.187 | .820 | 3 | 1.750 | R10 | 1.500 | 1.000 | 3 | 2 | R11 | 1.830 | 1.250 | 4 | 2.250 | R12 | 2.185 | 1.375 | 4 | 2.375 | R14 | 2.560 | 1.375 | 6 | 2.500 | R15 | 3.000 | 1.375 | 6 | 2.500 | R16 | 3.500 | 1.375 | 7 | 2.500 | R17 | 4.000 | 1.500 | 7 | 2.500 | R18 | 5.500 | 2.125 | 9 | 4.500 | R19 | 6.500 | 2.125 | 11 | 4.500 |
Millimeter | DIN 1547
Type | Nib | Casing | Dia. | Ht. | Dia. | Ht. | D10-0804 | 8 | 4 | 28 | 12 | D10-1008 | 10 | 8 | 28 | 16 | D10-1210 | 12 | 10 | 28 | 20 | D10-1412 | 14 | 12 | 28 | 22 | D10-1613 | 16 | 13 | 43 | 25 | D10-2017 | 20 | 17 | 43 | 32 | D10-2520 | 25 | 20 | 53 | 35 | D10-3024 | 30 | 24 | 75 | 40 |
| Millimeter | Type | Nib | Casing | Dia. | Ht. | Dia. | Ht. | B | 13 | 10 | 30 | 16 | D | 16 | 14 | 32 | 20 | G | 22 | 18 | 40 | 26 | H | 30 | 21 | 66 | 35 | K | 40 | 25 | 95 | 40 | L | 50 | 28 | 95 | 48 | M | 60 | 35 | 114 | 60 | N | 75 | 35 | 114 | 70 | O | 90 | 35 | 145 | 70 |
Millimeter | JIS Type | Nib | Casing | Dia. | Ht. | Dia. | Ht. | W101 | 6 | 4 | 24 | 7 | W102 | 9 | 6 | 24 | 12 | W103 | 12 | 8 | 30 | 15 | W104 | 15 | 10 | 42 | 20 | W105 | 20 | 14 | 55 | 24 | W106 | 25 | 18 | 60 | 28 | W107 | 30 | 22 | 70 | 35 | W108 | 35 | 25 | 85 | 40 | W109 | 40 | 27 | 100 | 45 | W110 | 50 | 30 | 125 | 50 | W111 | 60 | 35 | 145 | 60 | W112 | 70 | 40 | 175 | 70 | W113 | 80 | 45 | 195 | 80 | W114 | 90 | 50 | 215 | 90 | W115 | 100 | 50 | 230 | 90 | W116 | 110 | 50 | 230 | 90 | W117 | 120 | 55 | 250 | 100 | W118 | 130 | 55 | 275 | 100 | W119 | 140 | 60 | 295 | 110 | W120 | 150 | 60 | 315 | 110 |
|
