Guangzhou Yuanxing Industrial Co., Ltd. |
|
Jekit 6 Pots Gold Brake Caliper 380*34mm Disc For Nissan GTR R35
Product | Brembo GT6 Brake Caliper Kit |
Disc Size | 380*34mm |
Pots Size | 30/34/38mm |
Pots Area | 52.14mm |
Hydraulic Thread Hole | M10x1-6H |
Mounting Offset | 55mm |
Caliper Mounting Hole Center | 200mm |
Mounting Hole Diameter | 12.2mm |
Pots Numbers | 6 Pots |
Brake disc
If all four wheels are practical disc brakes, all four wheels will have a brake disc. The brake disc is a component rotating with the wheel, which can prevent the tire from continuing to rotate and convert kinetic energy into heat energy.
brake caliper
The brake caliper is a component attached to the front and rear of
the brake disc. There are single or multiple pistons in the brake
caliper. When pressing the brake pedal, pressure will be generated
to force the brake oil to push the piston, and then push the brake
pads to clamp the brake disc inward to achieve the effect of
braking deceleration.
Brake pad
The brake pad is a wear-resistant part in contact with the brake
disc, which is installed in the brake caliper. The pressure exerted
by the brake pad on the brake disc is the key action to slow down
the car.
Brake oil pipe
The job of these oil pipes is to deliver brake oil. When the brake
pedal is pressed, the brake oil will flow through the pipeline to
the brake caliper on each wheel and push the piston in the caliper
to clamp the brake disc.
How to enhance the braking effect?
Increase the radius of the brake disc
Since the braking force is equal to the force applied by the brake
pad multiplied by the distance from the center of the wheel,
increasing the distance from the center is a good thing in this
case. Therefore, the radius of many modified brake discs on the
market is larger than that of the original brake disc, so that the
larger brake disc can provide greater braking force.
Increase caliper piston area
This is commonly referred to as the replacement of large calipers.
Increasing the size of the piston in the calipers means that more
areas exert specific pressure. If the pressure remains constant and
the area increases, the applied force will also increase.
Increase tubing pressure
As the pipeline pressure increases, the braking force will also
increase. If you can increase the line pressure (e.g. using a
vacuum brake booster), you can indirectly optimize the braking
effect.
Increase the friction coefficient between brake pad and brake disc
This is also the most popular method. You can change some brake
discs with better materials, such as ceramic brake discs. In
addition, there is another way to change some better brake shoes.
Both methods can increase the friction coefficient between brake
shoes and brake discs.
How to reduce brake heat attenuation?
But as the braking effect goes up, the thermal attenuation of the brake will increase, so we need to use other methods to reduce the attenuation of braking performance! For example, replace a larger brake disc to make the brake disc better absorb heat energy. In addition, ventilated brake disc or scribed and perforated brake disc can greatly reduce the temperature of brake disc during braking. In addition, the brake cooling air inlet pipe can be replaced