HT250 Rear Car 4 Pot Brake Kits For Cars Caliper Full Floating Bell 355*28mm

Jekit rear car brake kit caliper full floating bell 355*28mm disc

Product Introduction

brake knowledge

tire
As the only contact with the ground, deceleration needs to be achieved by tires, which will directly affect the braking distance. Performance-oriented tires have a higher coefficient of friction and better grip, which is of course helpful for deceleration. At the same time, the Combine Force of the performance tires (the tires need to simultaneously deal with the grip requirements from various directions such as acceleration and deceleration and left and right steering) is better, the sidewall support is also better, the brakes are better, and the control can be improved at the same time. The car.
Brake Pads
As one of the core components of the brake system, it is a cost-effective choice for improving the brakes, and it is very worthwhile for us to spend. Brake pads are generally classified as original replacement, dual-use for street and street racing, and pure track. Our street runners can choose street or street race dual-use. The general performance is higher friction coefficient, wider working temperature range, and better thermal attenuation control. Of course, there are still many factors that need to be considered, such as minimum operating temperature, service life, dust volume, friction noise, aggressiveness to the disc, etc.
brake disc
In fact, the good friction coefficient of the brake pads can not avoid the loss of the brake disc, after all, the braking force comes from the friction force. The improvement of the brake disc will also be of greater help in terms of thermal attenuation and major thermal stability. In addition, materials such as material, processing technology, processing technology, as well as scribing (better friction), punching (better heat dissipation), internal air duct design, etc. will all have a corresponding effect. The better it is, the more expensive it is.
Brake hose & brake fluid
Brake fluid flows in the brake hose, which is responsible for transmitting pressure and requires corrosion resistance, high temperature resistance and high pressure resistance. The nylon material of the original car swells under pressure, which is equivalent to removing a part of the force. After replacing it with a steel throat, the expansion can be suppressed to a large extent, which is why it can improve the foot feel. However, the relative pressure tolerance will decrease. It is recommended to check more during routine maintenance to eliminate the hidden danger of pipe bursting and prevent leakage.
Modification is not such a tall thing, it can be a small upgrade, a small replacement, or a small beautification, even a small sticker of your choice can be different. Have you found something in common? They will all make your face smile.
Changing the car is happy.

JKGT4 reference picture