Guangzhou Yuanxing Industrial Co., Ltd. |
|
Jekit rear car brake kit caliper full floating bell 355*28mm disc
Product Introduction
Item Name | 4 pot brake kit |
Pots | 4 pistons |
Disc type | J hook/Drilled/Grooved/Slot straight lines/custom disc type |
Functional Characteristics | Vortex in the form of rapid cooling ,improve 40% of the braking effect and brake friction performance. |
For Wheel size | 18 inch |
Color | Red |
Full set included | 1 pair brake caliper/1 pair brake disc with center cap and bracket/ 1 pair brake line/1 set brake pads |
brake knowledge
tire
As the only contact with the ground, deceleration needs to be
achieved by tires, which will directly affect the braking distance.
Performance-oriented tires have a higher coefficient of friction
and better grip, which is of course helpful for deceleration. At
the same time, the Combine Force of the performance tires (the
tires need to simultaneously deal with the grip requirements from
various directions such as acceleration and deceleration and left
and right steering) is better, the sidewall support is also better,
the brakes are better, and the control can be improved at the same
time. The car.
Brake Pads
As one of the core components of the brake system, it is a
cost-effective choice for improving the brakes, and it is very
worthwhile for us to spend. Brake pads are generally classified as
original replacement, dual-use for street and street racing, and
pure track. Our street runners can choose street or street race
dual-use. The general performance is higher friction coefficient,
wider working temperature range, and better thermal attenuation
control. Of course, there are still many factors that need to be
considered, such as minimum operating temperature, service life,
dust volume, friction noise, aggressiveness to the disc, etc.
brake disc
In fact, the good friction coefficient of the brake pads can not
avoid the loss of the brake disc, after all, the braking force
comes from the friction force. The improvement of the brake disc
will also be of greater help in terms of thermal attenuation and
major thermal stability. In addition, materials such as material,
processing technology, processing technology, as well as scribing
(better friction), punching (better heat dissipation), internal air
duct design, etc. will all have a corresponding effect. The better
it is, the more expensive it is.
Brake hose & brake fluid
Brake fluid flows in the brake hose, which is responsible for
transmitting pressure and requires corrosion resistance, high
temperature resistance and high pressure resistance. The nylon
material of the original car swells under pressure, which is
equivalent to removing a part of the force. After replacing it with
a steel throat, the expansion can be suppressed to a large extent,
which is why it can improve the foot feel. However, the relative
pressure tolerance will decrease. It is recommended to check more
during routine maintenance to eliminate the hidden danger of pipe
bursting and prevent leakage.
Modification is not such a tall thing, it can be a small upgrade, a
small replacement, or a small beautification, even a small sticker
of your choice can be different. Have you found something in
common? They will all make your face smile.
Changing the car is happy.
JKGT4 reference picture