Active Member
|
[China]
Address: 803, WeiXinDa, BaoMin 2nd Road, XiXiang, Bao'an District, Shenzhen, Guangdong Province, China.
Contact name:Orchard
Shenzhen Jelinn Technology Co., Ltd. |
|
|
Green Deutsch 9-Pin J1939 Male to OBD2 OBD-II Female and J1939 Female CAN Bus Y Cable
Specification
| 9-Pin J1939 female socket | equivalent of Deutsch HD16-9-1939S-P080 |
| Type of 9-Pin J1939 female socket | Type 2 |
| 9-Pin J1939 male receptacle | equivalent of Deutsch HD10-9-1939P-P080 |
| Type of 9-Pin J1939 male receptacle | Type 2 |
| Color of 9-Pin J1939 connectors | Green |
| Wire | 20AWG, pure copper |
| Material of 9-Pin J1939 connectors | PA66 + glass fiber |
| Material of OBD2 female connector | PA66 |
| Pin assignment or pin out | customized |
| Cable length | customized |
| Pins or terminals | copper, nickel-plated or gold-plated |
| Contact Resistance | 3 ohm max. |
| Insulation Resistance | 5M ohm min. |
| Working Temperature | −25℃ ~ +85℃ |
| Testing | 100% open, short and mis-wire testing |
| Testing Voltage | DC300V 5M ohm/10ms |
| Warranty | 1 year |
The end of 9-Pin J1939 female and male connectors can be overflow molded or not, according to your needs.
Overflow molded
Not overflow molded
The Deutsch 9 Pin J1939 male receptacle is Type 1, so its Pin F is with
bigger diameter. Type 1 or Type 2 J1939 female sockets can be
inserted into Type 1 J1939 male receptacles.
Pin assignment or pin out
Generally speaking, the pin assignment or pin out will be like this
(4 pins to be connected):
| OBD2 female | Signal | 9-Pin J1939 female | 9-Pin J1939 male |
| 4 or 5 | Ground | A | A |
| 16 | Battery | B | B |
| 6 | J1939, CAN-H | C | C |
| 14 | J1939, CAN-L | D | D |
Sometimes, the pin assignment or pin out can also be like this (6 pins to be connected):
| OBD2 female | Signal | 9-Pin J1939 female | 9-Pin J1939 male |
| 4 or 5 | Ground | A | A |
| 16 | Battery | B | B |
| 6 | J1939, CAN-H | C | C |
| 14 | J1939, CAN-L | D | D |
| 2 | J1708-H | F | F |
| 10 | J1708-L | G | G |
The 6-wire cable also includes wiring for the J1708 lines. If you do not need the J1708 wires, it is better not to connect them as sometimes the added lines can interfere with the operation of some GPS trackers.
The pin assignment or pin out can also be customized according
to your needs.
Application
This cable is used to connect telematics, fleet management devices or trucking technology devices such as GPS Trackers or ELDs (Electronic Logging Devices) to commercial vehicles that have the J1939 9-pin round Deutsch ports.
This cable will also allow OBD2 diagnostic devices or scanners or fault code readers (with the appropriate software) to connect to the round J1939
connector. Bear in mind that most OBD2 software and scanners are
based on reading PIDs, which are single parameters. J1939 is a PGN
based protocol, where each PGN contains multiple parameters. Your
diagnostic or scanner tool must be able to handle PGNs if
it is to work with this cable.
Sending an inquiry
If you haven’t found or don’t have time to look for the J1939, OBD2
or J1708 cables, adapters or connectors in our website, feel
free to let us know what J1939, OBD2 or J1708 cables, adapters or
connectors you need by sending an inquiry (If you have a picture, please attach it in the inquiry). We can
also customize any J1939, OBD2 or J1708 cables, adapters or connectors for you.
Skype: orchard.guo (any time to contact)
