Results foriso water testing equipmentfrom 128988 Products.
|
UL486 Rotary Tensile Strength Test On Clamping Screw Terminal For Checking Damage Degree of Wire Product overview: This testing machine is also called the test apparatus for ...
|
|
|
|
IEC 60598-2-21 Figure 2 Low-temperature Winding Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire ...
|
|
|
|
APPLE's Standard 080-1276-K Clause 7.7 DC Cable Impact Tester for Testing Impact Resistance of DC Wires By Sharp Object Description: This instrument is designed and processed ...
|
|
|
|
IEC 60598-1 Clause 8.15 Arrangement For Impact Test For Handlamps With a Handle Or Shell Of Flexible Material Product information: This test device is designed and manufactured ...
|
|
|
|
IEC 60335--2-23 Flexing test apparatus for swivel connection-Skin or Hair Care Appliance Standard: IEC60335-2-23 clause 11.101 of Household and similar electrical appliances – ...
|
|
|
|
Electronic intelligent door lock aging test stand - intelligent door lock Product overview: This test stand is suitable for the aging test of PCBA main board of electronic ...
|
|
|
|
Test System for Conductive Harassment and Disturbance of RF Field Induction CRF61006A/B CRF61006A /B radio frequency conduction immunity test system, according to the IEC61000-4-6 ...
|
|
|
|
Diameter 60mm Test Rod , EN 60335-2-30 Surfaces that are accessible to the test rod Product Description: 1. According To Standard: EN 60335-2-30 2. It is used to the protective ...
|
|
|
|
IEC60745 Electric Hammer Durability Test Apparatus Standard: IEC60745-2-1, IEC60745-2-6 Model:YW-1186 Purpose: used for the test of the durability of hand-held electric tools below ...
|
|
|
|
1. Product Name: pulse test generator 2. Product model:KP-PRM65 3. Standard basis:IEC62368-1:2018 Appendix D and figure D.1 4. Product introduction: The pulse test generator is ...
|
|
|
|
Specifications: This apparatus is mainly used to perform the abrupt pull test of plug. This apparatus is designed and manufactured in accordance with UL 962A Figure SB16.1 / UL817 ...
|
|
|
|
EN 14543:2005+A1:2007 (E) Clause 7.2.2.2 Figure 1 Test Cone Protecting Against Accidental Contact With The Burner EN 14543:2005+A1:2007 (E) Specification for dedicated liquefied ...
|
|
|
|
Conform to EN 60598-1 clause 9.2 Where connection is made by a plug or a similar device, then this shall be regarded as part of the complete luminaire and shall be included in the ...
|
|
|
|
STM E162 Radiant Panel flame propagation properties Test apparatus for material for rail train Description ASTM E162 is one most widely used test standard to evaluate the ...
|
|
|
|
IEC 60601-1 clause 9.8.3.3 Loading test machine Technical Parameters: Applied standards IEC 60601-1 Clause IEC 60601-1-clause9.8.3.3 Model KP-601A Test station One station Drop ...
|
|
|
|
ISO20653 High Temperature And Pressure Water Jet Test Chamber IPX9K This device is applied to electrical and electronics, electric appliances, auto parts and other accessories ...
|
|
|
|
IEC 60601-1-Test Pin According to IEC 60601-1-figure 8 TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 + Am.1:2012 Medical electrical equipment - Part 1: ...
|
|
|
|
220V Oxygen Air Bomb Aging Test Chamber With Intelligent Control GB/T2951.12-2008 Product information: This aging tester conforms to the standard requirements of GB/T2951.12-2008 ...
|
|
|
|
IEC 60950 Figure 2C / IEC62368-1 Figure V.3 Blunt Probe Testing the Limited Access to Telecommunications Voltages The Blunt probe is required in IEC62368,IEC 60950,IEC 60065, UL ...
|
|
|
|
Bend Test / SeismicTest of Appendix of Eletrical Appliance and Material Safety Law(the first Supplementary Table 24) Standard requirement: Number of trials: adjustable Bending ...
|
|
|
You may also be interested in :