Active Member
|
[China]
Address: #1,chencongxi10xiang,chencongcun,qiaonanjiedao,panyu,Guangzhou
Contact name:Lucy
Guangzhou Shice Equipment Co., Ltd. |
|
|
Impact Testing Device Striking Element 2J 5J 10J 20J IEC60068-2-75
Parameters:
| Model(Energy) | 2J | 5J | 10J | 20J | 50J |
| equivalent mass(kg) | 0.5 | 1.7 | 5 | 5 | 10 |
| Dripping height(±1% mm) | 400 | 300 | 200 | 400 | 500 |
| Diameter(mm) | 35 | 60 | 80 | 100 | 125 |
Standard: IEC60068-2-75 Annex A
Application: This device is suitable for mechanical impact strength test to electric cabinets and other sheet metal, shell of Non metal electric energy metering cabinet, substation cable switchboard and cable junction box with vertical impact tester or pendulum impact device.
Test sample: Electrical appliance for household and similar purpose, luminaries
Feature: In according with the standard requirement
Standard description (IEC60068-2-75):
Figure A.1 shows the striking element applicable to energy values
of equal or less than 1J. In this case, the impact face should be
made of polyamide with a hardness as specified in Table 1 .
Figures A.2, A.3 and A.4 show the striking elements applicable to
energy values of 2J, 5J and 10J, respectively. In these cases the
impact face should be made of steel with properties, including
hardness, as specified in Table 1 .
Figures A.5 and A.6 show the striking elements applicable to energy
values of 20 J and 50J, respectively. In these cases, the impact
face should be made of steel with properties, including hardness,
as specified in Table 1 . In these cases, to comply with the other
parameters of Table 1 , it is necessary to hollow out the end
opposite to the striking face.
Every edge shall be smoothed.
The tolerances are as per class m of ISO 2768-1 , unless otherwise
stated.
