Home Companies Guangzhou Shice Equipment Co., Ltd.

350mm Electrical Appliance Tester

Active Member

Contact Us

[China]

Address: #1,chencongxi10xiang,chencongcun,qiaonanjiedao,panyu,Guangzhou

Contact name:Lucy

Guangzhou Shice Equipment Co., Ltd.

350mm Electrical Appliance Tester

Country/Region	china
City & Province	guangzhou

Product Details

Cellphone Drum Drop Test Machine Phone Tumbling Barrel Apparatus

Product introduction:

This machine is suitable for mobile phone, PDA, electronic dictionary, CD / MP3 for continuous rotation (drop) test.

Applicable standard: IEC60068-2-32

Test standard: there are two specifications of the tester: IEC-60884-1, VDE and BS1363.

Test method: the plug including the power line at the back end is cut off at a position of 100 mm. As a test piece, it is put into the roller.

According to the weight of the test piece, the rolling times are set to make the test piece fall down continuously, and then check the damage degree of the test piece.

Parameters:

No	Item	Data
1	Allowable weight of test piece	5kg (max)
2	Falling height	500mm or 1000mm (can be specified)
3	Drum width	350mm
4	Rotation speed	5-20 times / min
5	Test times	1-999999 (can be set)
6	Machine size (w * D * h)	1020 * 810 * 1170mm 240012001350mm
7	Power supply	AC 220 V or specified

Tips for use:

1. Place the machine in a horizontal position.

2. Turn on the power cord and turn on the power switch.

3. Set the counter and set the required number of tests.

4. During the test, open the cylinder cover (if the position is not directly above, start the power supply first, press the start key "start" to turn the cylinder cover to the top

5, then press the stop key "stop"; then put the test piece into the cylinder and close the cylinder cover).

6. Press the start key "start" and the drum starts to rotate.

7. When the counter reaches the set number, it will stop automatically.

8. Take out the test piece and check its damage degree.

List of tumbling barrel apparatus:

Model	TB-1	TB-2
Power Supply	220V 50Hz or 115V 60Hz	220V 50Hz or 115V 60Hz
Speed of rotation	5 r/min	5 r/min
Feel times	10 times/min	10 times/min
counter	0~9999	0~9999
Material	3 mm steel	3 mm steel and Block of wood and plastics laminated sheet
Height	650 mm	675 mm(or 1175)
Dimension	WDH=630mm x 600mm x 1250mm	WDH=630mm x 600mm x 1250mm
Chute Length	275mm	275mm
Conforms to standard	VDE0620.1 IEC60598	IEC60068-2-32, IEC60884.1, EN50075

Model	TB-3	TB-4
Power Supply	220V 50Hz or 115V 60Hz	220V 50Hz or 115V 60Hz
Speed of rotation	5 r/min	5 r/min
Feel times	10 times/min	10 times/min
counter	0~9999	0~9999
Material	19 mm nominal thick blockboard	5 mm steel and hard wooden plate
Height	650 mm	1070 mm
Dimension	WDH=630mm x 600mm x 1250mm	WDH=630mm x 600mm x 1450mm
Chute Length	275mm	275mm
Conforms to standard	BS1363.1 UL60730	IEC60312