Home Companies CHIFON ELECTRIC CO.,LIMITED

CE 15KW PMSM Synchronous Motor VFD Fan Speed Control 3 Phase FPR500E

CHIFON ELECTRIC CO.,LIMITED
Active Member

Contact Us

[China] country

Address: No. 25 Xianxing Rd, Xianlin Industrial Park, Hangzhou, Zhejiang, China

Contact name:Molly

Inquir Now

CHIFON ELECTRIC CO.,LIMITED

CE 15KW PMSM Synchronous Motor VFD Fan Speed Control 3 Phase FPR500E

Country/Region china
City & Province hangzhou zhejiang
Categories Inverters & Converters
InquireNow

Product Details

CE Certificated 15KW 3Phase VFD Inverter FPR500E For PMSM Synchronous Motor

 

Product Specification

 

  1. FPR500 is a high reliability and high software performance motor drive with rich and perfect software&hardware functions to meet the application needs of most industrial sites;
  2. FPR500 can drive asynchronous motor and permanent magnet synchronous motor(PMSM) simultaneously. It could run with vector control without PG card, vector control with PG card, speed/torque control, and position servo control.
  3. Adopt an advanced software vector control algorithm, which can provide high-performance open-loop vector control for asynchronous motor and synchronous motor. Meanwhile, simple vector control of asynchronous motor and synchronous motor can be used to meet the requirements of general speed adjustment application.
  4. Built-in PID controller, the improved PID function can satisfy most of the on-site process control, such as the closed-loop control of temperature, pressure, and flow.
  5. Standard 485 communication interface, support Modbus/RTU communication protocol, direct and upper computer communication for field bus control.

 

 

Technical characteristics
 

 
ItemsSpecification
Control modeControl modeV/F controlSensorless in open loopClosed loop vector control
 Starting torque0.5Hz 150%0.5Hz 180%0.00Hz 180%
 Speed adjust range0: 501:1001:1000
 

Speed stabilizing

precision

±1%±0.1%±0.02%
 Torque precisionNONO±5%
 Motor type

General induction motor

permanent magnet synchronous motor (PMSM )

Function designHighest frequency

General vector control:320Hz

V/f control: 3200Hz

 frequency resolution

Digital setting: 0.01Hz

Analog setting:maximum×0.025%

 Carrier frequency0.5K~16KHz, the carrier frequency can be adjusted by temperature automatically
 Frequency reference setting methodDigital of Control panel, analog AI1, AI2, potentiometer of the control panel, UP/DN control, communication, PLC pulse frequency
 Acceleration./deceleration characteristicLinear curve and S curve accel. /decal. mode, range of time: 0.0 to 65000S.
 V/F curve3 mode: linear, multiple points, N Power
 V/F separation2 times separation: totally separation, half separation
 DC braking

DC braking frequency: 0.0 to 300Hz,

DC braking current: 0.0% to 100%

 Braking unitStandard built-in for up to 4T22G (22kw), optional built it for 4T30G~4T110G (30kw to 110kw), external built for above 4T160kw .
 Jog functionJob frequency range: 0.0 to 50.0Hz, the acceleration and deceleration time of Jog
 Configured PID functionEasy to perform pressure, flow, temperature close loop control.
 PLC multiple speedTo achieve 16 segment speed running through built in PLC or terminal control
 Common Dc busMultiple drives use one DC bus for energy balance.
 Auto voltage regulation (AVR)Enable to keep output voltage constant when grid fluctuation
 Overload tolerance capability

G type model: 150% rated current for 60s, 180% rated current for 3s,

P type Model: 120% rated current for 60s, 150% rated current for 3s.

 Stall protection control when over-current, over-voltageCarry out limiting automation for running current, voltage to prevent over current, over voltage frequently
 Rapid current limit functionMinimize the IGBT module broken to protect the AC Drive, maximum reduce the overcurrent fault.
 Torque limit and torque control

"Excavator" characteristics, torque limit automatically during motor running. Torque control is available in close loop vector control mode.

 

 

FeaturesMultiple function key JOG buttonIt can be set for forwarding Jog, reverse Jog, forward/reverse switch
 Timing control functionA total running time and total running time calculating
 2 group motor parametersTo achieve two motor switchovers freely, the control mode is selectable
 Motor overheat protectionAccepting motor temperature sensor signal input via AI1 terminals.
 Multiple kinds encoder *Compatible collector PG, differential PG, and rotary transformer Encoder( resolver).
 Command sourceControl panel, control terminals, series communication, switch freely.
 Frequency sourceDigital setting, analog current/voltage, pulse setting, serial communication, main and auxiliary combination.
 Protection functionThe short circuit detects when power is on, input/output phase loss, over-voltage, over-current, under-voltage, overheat, overload protection.
EnvironmentApplication siteIndoor, free of exposure to sunlight, no dusty, no corrosive, no inflammable gas, no oil and water vapor, and water dipping
 AltitudeLower 1000m
 Environment temperature-10℃~+40℃, power derated for 40~50℃, rated current derated 1% for 1℃ increasing.
 humidityLess than 95%, no water condense.
 storage-40~+70℃

 

 

Product gallery

 

 

 

 

Factory tour:

 



 

 


 

Hot Products

High-Performance Variable Speed Drive VSD 380V 3 Phase 160kw For Chemical Plants What is a Variable ...
V/F Control Low Voltage 37KW 3Phase VFD Inverter For Fire Water Supply Technical characteristics ...
V/F Control Iron Case 45KW 3Phase VFD Fan Speed Control Inverter Product Functions: Basic Function ...
Self-patented Low Voltage VFD Inverter 380V 3 Phase 250kw For Glass processing Industry FPR500A ...
CE Certificated 15KW 3Phase VFD Inverter FPR500E For PMSM Synchronous Motor Product Specification ...
Self-developed Variable Speed Drive Inverter 380V 3 Phase 220kw For Food Processing Industry VFD in ...