Active Member
|
[China]
Address: B3 Building, An'le Industrial Zone, Hangcheng Road, Gushu, Xixiang town, Baoan, Shenzhen, China
Contact name:Jo Tsui
Shenzhen Yunlink Technology Co., Ltd. |
|
|
1200Mbps 802.11ac Wave 2 Technology MU - MIMO Technology WIFI Access Point
High Power for more range and stable signal
Designed in two line Power Amplifier on PCB board, the power can be
1000mW high power, 5dBi MIMO high gain antenna, together with
Ceiling mount, greatly increase the wireless range and supply the
stable Wi-Fi signal for users.
Wave 2 Technology
With Wave 2 Technology, it adopt 256QAM modulation, support MU-MIMO
(Multi-User Multiple-Input Multiple-Output), 160MHz Frequency,
greatly to improved the communication efficiency.
Power over Ethernet
XD4200 has integrated IEEE802.3at Power over Ethernet (PoE), for
easy installation and lower cost. So it can be installed in areas
where power outlets are not readily available, eliminating the mess
of altering existing network infrastructure.
Access Controller System & Cloud Management System
With Access Control System, easily access advanced network settings
through PC, like AP status monitor, change IP address, ESSID,
Channel, Password, upgrade firmware, backup and restore
Spec:
| Hardware: | |
| Chipset | Qualcomm QCA9563 + QCA9886 +QCA8334 |
| Standard | 802.11ac/b/g/n, MIMO technology |
| Memory | 128MB DDR2 RAM |
| Flash | 16MB |
| Interface | 1 * 10/100 /1000Mbps RJ45 WAN Port |
| 1 * 10/100 / 1000Mbps RJ45 LAN Port | |
| 1 * Reset button, press 15 seconds to revert to default setting | |
| Antenna | Build in 5dBi MIMO Antenna |
| Power consumption | 48V PoE<30W |
| Size | 198mm X 28mm |
| Weight | |
| RF Data | |
Frequency | 2.4G:802.11b/g/n; 5GHz:802.11a/n/ac |
| 2.4GHz, 5GHz | |
| Country code | FCC,IC,ETSI,MKK,MKK1,MKK2,MKK3,NCC,RUSSIAN,CN |
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM |
| DSSS = DBPSK, DQPSK, CCK | |
| Throughput | 1200Mbps |
| RF Power | 2.4G: 11n @MCS7:26±2DB, @MCS0:28±2DB. 11g @54M:27±2DB, @6M:29±2DB. 11b @11M:28±2DB, @1M:30±2DB. 5.8G: 11a @54M 22±2DB, @6M 25±2DB. 11n @HT20:MCS7 21±2DB, @MCS0 24±2DB. 11ac@HT80:MCS9 19±2DB, @MCS0 22±2DB. |
| Receive Sensitivity | 2.4G: 11n: -70dbm@MCS7, -88dbm@MCS0. 11g: -72dbm@54Mbps, -88dbm@6Mbps. 11b: -85dbm@11Mbps, -94dbm@1Mbps. 5.8G: 11a: -72dbm@54Mbps, -90dbm@6Mbps. 11n@HT20: -70dbm@MCS7, -90dbm@MCS0. 11ac@HT80:-60dbm@MCS9, -86dbm@MCS0. |
| EVM | 802.11n: ≤-28 DB 802.11g: ≤-25 DB 802.11b: ≤-10 DB 802.11a: ≤-25 DB |
| PPM | ±20ppm |
| Max Users | 128+ |
| Firmware Features: | |
| Operation mode | Wireless AP, Gateway, WISP, WiFi Repeater |
| WAN Type | Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) |
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption |
| SSID | Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G) |
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain
Filter IP and MAC Address Binding |
| Protocols | IPv4 |
| Others: | |
| Package Contents | 1200Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux |
| Environment | Operating Temperature: -20~55 ℃ Storage Temperature: -40~70 ℃ (-40 ℉~158℉) Storage Humidity: 5%~90% non-condensing |
| Management | Firmware GUI , Remote Management, WLAN Controller, Cloud Management System |
More Pictures:
