Active Member
|
[China]
Address: Economic development zone ,Zhangjiagang city, Jiangsu Province CHINA
Contact name:James
ZHANGJIAGANG FLAME MACHINERY CO.,LTD. |
|
|
| Type | TW-P4-200T |
| Clapping force(TON) | 200 |
| Stroke(MM) | 250 |
| Working Plate Size(MM) | 550*560 |
| Dimeter of cyhnder(MM) | 355 |
| Horse powet(HP) | 10*2 |
| Heater power(KW) | 25 |
| Total power(KW | 42 |
| Gross weight(KG) | 7000 |
| Machine size(MM) | 2900*2200*2000 |
Machine characteristics
4RT mold opening is the machine type with multiple functions,
suitable for the two-laype and three-layer molds.
Double powers, double oil pumps, double motors and double oil
coolers
are applied for the two axles to work independently.
The oil system is unique in design with good stability, faster
lift-up and
lift-down speed compared with other brands when unloading/loading
mold.
With the function of slow speed alignment adjusting,
the adjustment is more precise and safe.
The accurate placement of the loading/unloading mold has
the 100% placement safety design, protecting the mold from being
damaged.
The speed of mold raising and closing can be adjusted accurately
and safely.
Adjustment of hydraulic system
The high-pressure overflow valve is adjusted to slightly higher than the
working system pressure, and it is strictly prohibited to exceed 20Mpa.
The low voltage is regulated by the pressure relay, which must be
set below 1.5mpa. It is forbidden to be too high,
or the motor will be damaged due to overload.(set when leaving the factory)
The electric contact pressure gauge shall be adjusted to the required
working pressure.
It is strictly prohibited to exceed the rated system pressure of 20Mpa.
