Active Member
|
[China]
Address: 307, 6A, ANGU Industrial Park, No. 8, Dongwang Road, SIP, Suzhou, Jiangsu Province, China 215 123.
Contact name:Rocky
Sinotectronics Inc. |
|
|
17 Inch Anti-finger Print Pcap GFF Structure Touch Panel Sputtering an ITO Pattern
1. Product Description
Master Touch GFF projected capacitive touch screen panel, via a process of sputtering an ITO pattern on a film substrate to make a film-sensor, perceive touch accurately through capacitance coupling. 17 to 43 inch Master Touch touch screen panel with water-proof, dust-proof, vandal proof function has the following advantages: light in transportation, long lifespan for both industrial and consuming level products application, accurate touch, fast response, etc.
2. Module Specification
2.1 Basic Information
| Item | Feature | Remarks |
| Controller | WD8752 | - |
| Channel | TX :36 RX: 46 | - |
| Power | 5V | USB: 4.7V ~ 6.0V, Typical:5V |
| Communication | USB | USB: 2.0 Full Speed |
| Number of Touch point | 10 | - |
| O.S. | Windows/ Android/ Linux | |
| Power Consumption | 1.Active Mode: Max.120mA @ USB Input 5V 2.Idle Mode: 90mA @ USB Input 5V 3.Sleep Mode: less than 1mA @ USB Input 5V | |
| Item | Specification | Unit |
| Screen Size | 17 | Inch |
| Viewing Area | 340.12(L)×272.54(W) | mm |
| Cover lens O.D | 356.12(L)×298.14(W) | mm |
| Item | Specification | |
| Transparency | Viewing Area | ≧85% |
3. Sensor Specification
| Item | Specification | Unit | ||
| Stacked structure | Cover | 2.0 | mm | |
| Top OCA | 0.125 | mm | ||
| Film Sensor | 0.125 | mm | ||
| Bottom OCA | 0.125 | mm | ||
| Film Sensor | 0.125 | mm | ||
| Sensor Dimension | OD Size | X | 355.12 | mm |
| Y | 297.14 | mm | ||
4. Electrical Specification
| Item | Type | Value | Unit | Remarks |
| Operating Temperature | - | -20 ~ +80 | ℃ | Humidity 20%~85% RH |
| Storage Temperature | - | -30 ~ +80 | ℃ | Humidity 20%~85% RH |
| ESD Requirement | ESD air requirement | ±8 | KV | Air |
| ESD contact requirement | ±6 | KV | Touch |
5. Function Test
5.1 Inspection methods and conditions
Connect jigs (Supplier provide test jigs and test software) to a
computer; test touch function of products in normal electrical
characteristics.
5.2 Inspection standards
Don't allow any function abnormalities.
6. Drawing
8. Use Cautions
8.1 Storage Cautions
Storage products must according to the temperature and humidity of
product specification and do not accept direct sunlight or heavy
weight.
8.2 Move Cautions
Must maintain clear clarity of sample, so please wear fingerstalls
or gloves before you contact product. Gloves and mask will have
stains and hold product around please when you hold the product.
Avoid causing the lead loosing, please don't take the lead when you
take out the product.
8.3 Combination Install Cautions
1. Don't put the extra tension to the product. Because the
down-lead connection uses the hot pressing combination, do not use
extra tension.
2. Installation combined, please don't pull FPC heavily, because
pull heavily will make the FPC separated from product.
3. Please don't paste or install other items on the FPC. Such as:
pasting a layer FILM or metal plate on the FPC, Because these
add-ons will impose an extra pressure on the top of FPC, thus
leading to the inner side of FPC become flexible.
4. If there is an aeration slot, when you design the product
structure you need notice accessories of a product, they can’t have
any liquid and powder.
5. In order not to make the T/P surface pressure, so the distance
between the cabinet and our company’s T/P combination clearance
shall be maintained 0.2mm-0.5mm.
6. As it will make serious damage on the transparent electrodes to
operate in the area of the other than the drive area, we suggest
that the design cabinet shall cover the edge of thedrive area for
avoiding operating outside the area which would reduce machine
life.
8.4 Operation Cautions
1. Do not use sharp objects touch. Please with finger or conductive
pen touch
2. After long-term use, please use alcohol to remove product
surface uncleanness.
9. FAQ
