Active Member
|
[China]
Address: 307, 6A, ANGU Industrial Park, No. 8, Dongwang Road, SIP, Suzhou, Jiangsu Province, China 215 123.
Contact name:Rocky
Sinotectronics Inc. |
|
|
12.1 inch LOCA Adhesive LCD Display Touch Screen Optical Clarity
1. Product Description
Master Touch 12.1 inch Touch Panel+LCM (Optical Bonding) is the lamination of touch panel and the LCD module through optical bonding technology with OCA or LOCA (Whether OCA or LOCA is chosen depends of the application of the product or the LCD used.) that fills air gaps between components in LCD displays, improving brightness, contrast and enhancing shock resistance, stress mitigation, also reducing the parallax. In this way, the display and the touch screen are completely glued together without gaps, which isolates dust and water vapor to keep the screen clean.
With optical bonding, a protective cover glass is directly adhered to the LCD display with a thin, uniform layer of adhesive, effectively eliminating the air gap between the cover glass and display. This process increases optical clarity, protects the display from dust and moisture, reduces parallax issues, improves scratch and damage resistance, and is thin and lightweight.
2. Genaral Specification
2.1 LCD
| Model | EV121X0M-N10 |
| Size | 12.1 inch |
| Resolution | 1024(RGB)×768 [XGA] 105PPI |
| Luminance | 500 (Typ.) |
| Contrast | 1200 : 1 (Typ.) |
| Viewing Angles | 88/88/88/88 (Typ.)(CR≥10) |
| Signal System | LVDS (1 ch, 8-bit), 20 pin |
| Operating Frequency | 60Hz |
| Driving Voltage | 3.3V (Typ.) |
| TFT Thickness | 8.75mm |
2.2 Touch Panel
| Outline Dimension | 260.5*204 | mm |
| View Area | 245.5*184.3(12.1 inch) | mm |
| TP Thickness | 2.9 | mm |
| Total | 12.25 | mm |
| Touch IC | EETI80W46 | -- |
| Number of touchpoint | 10 | points |
| Number of button | -- | - |
Interface information driven plate | USB | - |
| The active information | -- | -- |
| The type of Bonding with LCD | Optical bonding | |
| Operation Temperature | -20℃~70℃ | ℃ |
Storage (cannot exceed 6 months) | Temperature: 23±3℃ (Before installation) Humidity:40%~70%RH | ℃ |
| Temperature: -30~80℃ (After installation) | ℃ |
| Item | Content |
| Transparency | 85±10% |
2.4 Electrical Spec.
| ESD Touch Side (Touch) | 4kv |
| ESD Touch Side (Air) | 8kv |
3. Reliability
High Temperature Operation | 70ºC, 48hrs | -- |
| Low Temperature Operation | -20 ºC, 48hrs | Non-condensing |
Operating Temperature/ Humidity | 60ºC/90%RH, 500hrs | Non-condensing |
| Thermal Shock | -30 ~ 80℃, 60 mins/cycle, total 48 cycles | -- |
4. Drawing
5. Notice
Due to the system of capacitive touch screen is made of glass, Please do not strong impact, The impact,Or Fall from height;
Please do not stack up TPs. Don’t load on TP;
Please do not put the capacitive touch screen itself or FPC direct contact with metal material;
When assembling, please do not bend or strength to pull FPC, Avoid to cause the injured;
When assembling, please do not touch ink face of back of TP, Avoid to scratches;
When assembling, please do not contact the visual area, if have dirty in VA, Recommend the use of anhydrous ethanol to clean;
Operation of the capacitive touch screen, Use finger or conductive touch pen, please; must avoid high voltage and static electricity.
6. Details
7. FAQ
