|
[China]
Trade Verify
Address: No. 2520, 25th Floor, Block A, New Asia Guoli Building, Huaqiang North Street, Shenzhen, China
Contact name:Lin
Shenzhen Sanhuang Electronics Co.,Ltd. |
|
Verified Suppliers
|
|
|
The KSZ9031RNX is a completely integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical layer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable.
• Single-chip 10/100/1000Mbps IEEE 802.3 compliant Ethernet
transceiver
• RGMII timing supports on-chip delay according to RGMII Version
2.0, with programming options for external delay and making
adjustments and corrections to TX and RX timing paths
• RGMII with 3.3V/2.5V/1.8V tolerant I/Os
• Auto-negotiation to automatically select the highest link up
speed (10/100/1000Mbps) and duplex (half/full)
• On-chip termination resistors for the differential pairs
• On-chip LDO controller to support single 3.3V supply operation –
requires only one external FET to generate 1.2V for the core
• Jumbo frame support up to 16KB
• 125MHz reference clock output
• Energy detect power-down mode for reduced power consumption when
the cable is not attached
• Energy Efficient Ethernet (EEE) support with low-power idle (LPI)
mode and clock stoppage for 100Base-TX/ 1000Base-T and transmit
amplitude reduction with 10Base-Te option
• Wake-on-LAN (WOL) support with robust custom-packet detection
• Programmable LED outputs for link, activity, and speed
• Baseline wander correction
• LinkMD TDR-based cable diagnostic to identify faulty copper
cabling
• Parametric NAND tree support to detect faults between chip I/Os
and board
• Loopback modes for diagnostics
• Automatic MDI/MDI-X crossover to detect and correct pair swap at
all speeds of operation
• Automatic detection and correction of pair swaps, pair skew, and
pair polarity
• MDC/MDIO management interface for PHY register configuration
• Interrupt pin option
• Power-down and power-saving modes (Continue ...)
• Laser/Network printer
• Network attached storage (NAS)
• Network server
• Gigabit LAN on motherboard (GLOM)
• Broadband gateway
• Gigabit SOHO/SMB router
• IPTV
• IP set-top box
• Game console
• Triple-play (data, voice, video) media center
• Media converter
| Attribute | Attribute Value |
|---|---|
| Manufacturer | Microchip Technology |
| Product Category | Interface - Drivers, Receivers, Transceivers |
| Series | KSZ9031 |
| Product | Ethernet Transceivers |
| Type | Transceiver |
| Packaging | Tray Alternate Packaging |
| Unit-Weight | 0.005309 oz |
| Mounting-Style | SMD/SMT |
| Package-Case | 48-VFQFN Exposed Pad |
| Operating-Temperature | 0°C ~ 70°C |
| Mounting-Type | Surface Mount |
| Voltage-Supply | 1.8V, 2.5V, 3.3V |
| Supplier-Device-Package | 48-QFN (7x7) |
| Protocol | Ethernet |
| Data-Rate | - |
| Number-of-Drivers-Receivers | 2016/4/4 |
| Duplex | Full |
| Receiver-Hysteresis | - |
| Maximum Operating Temperature | + 85 C |
| Operating temperature range | - 45 C |
| Operating-Supply-Voltage | 1.8 V 2.5 V 3.3 V |
| Standard | 10BASE-T 100BASE-TX 1000BASE-T |
| Supply-Voltage-Max | 1.26 V 3.465 V 2.625 V 1.89 V |
| Supply-Voltage-Min | 1.14 V 3.135 V 2.375 V 1.71 V |
| Package-Case | QFN-48 |
| Number-of-Transceivers | 1 Transceiver |
