|
[China]
Trade Verify
Address: Block B 1307, Green Square, Huaiyin District, Jinan China
Contact name:Rose
Jinan Lijiang Automation Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
1, To Avoide the low-e Glass put inverse side and Leave wheel marks
or scratch low-e Coating We use coating inspection -metal film
conductive (other company use Photoelectric detection, hard to
recognize for higher transparent)
2, three pairs soft brushes can wash low-e glass and normal glass ,
the diameter is less than 0.1mm.
3, Materials are stainless steel.
4, Air knife is float design , it always keep the right and
suitable distance 3mm between the glass surface and air knife (Same
like LISEC structure ) check the following picture. (3mm is the
best drying distance)
5, The front and back side squeeze wheel are all actively moved and
convey. No mater the glass size is big /small or thickness
different(8mm) , it all guarantee the glass pass through
smoothly.(Same like LISEC)
6, There have stress after welding in the Pressing frame ,
so the out-of -shape problems is inescapable after using some time
(machine can not press DGU properly evenly and tightly )
that is not good for IGU quality, any glass project can not accept
these products
7,For this uneven inescapable issue, here are our solution :
a. we all do the aging treatment , it’s the stress-remove by vibration failure device.
b. The important is We design the 74 points on the backbord, if
there have any out-of shape problems we can adjust easily at any
time. ( same like Bystronic structure )
8, Input the argon gas concentration into touch screen according to
customer required
9, Display Function : touch screen will display whole argon gas
filling processing , you will know very clear how much already
argon gas filed inside
We are the first and the only one company who can show the argon
percentage on the touch screen on line,its very useful for
customer,When it reach the data customer set ,It will alarm and
stop automatically
10, GAS filling from bottom and it was designed separately for
saving gas .
A: The pressing part was devided into 4 part , (per 800mm), when
the small size glass(less than 800mm) pass through the pressing and
gas filling section, ,only one part work.if more than 800mm but
less than 1600mm,it will two parts work, no need the whole press
and gas filling section work. it can save the argon gas.
Technical data
| Components | Brand | Remark |
| Servo motor | Germany Simens | For stepped glass |
| Servo driver | Germany Simens | For stepped glass |
| Servo motor | Germany Simens | For transfer |
| Servo motor | Germany Simens | For press |
| PLC | Germany Simens | |
| Low voltage component | Germany Simens | |
| Frequency converter | Germany Simens | |
| Switching power supply | Taiwan MW | |
| Optoelectronic switch | Korea Autonics | |
| Pneumatic component | Taiwan Airtac | |
| Pneumatic component | Taiwan Airtac | |
| Touch screen | Taiwan Wenview | |
| Travel switch | Taiwan (TEND) | |
| Relay | Japan Omron | |
| Button and indicator light | French Schneider |
| Max.glass size | Normal glass | 2500*3500mm |
| Glass with argon gas | 2500*3200mm | |
| Min.glass size | 280*450mm | |
| Glass thickness | 3-15mm | |
| Insulating glass thickness | 50mm(special made for 60mm) | |
| Glass washing speed | Summer 8-10m/min winter 6-7m/min | |
| Glass conveyor speed: | 45m/min | |
| Washing brushes | 3 pairs | |
| Water supply: | Water consumption:0.5t/h conductivity:≤50μs/cm6-7 | |
| Air supply | Flow: 0.8m/min | |
| Air pressure | ≥0.8MPa | |
| Total power | 3P380V 50HZ 34KW | |
| Dimension | 23500*3500*3700mm | |
other products
1.Insulated Glass Production Line
2.Molecular Sieve Filling Equipment
3.Glass Edging Machine
4.Suction Lifter
5.Automatic Glass Cutting Machine
Kation-Tech founded in 2009, specializes in R&D, production and
sales of Insulating glass machinery and related auxiliary equipment
for the glass deep processing industry and the door and window
construction industry. Has the professional processing basis of
insulating glass machinery, aluminum-plastic windows & doors
machinery and the related auxiliary materials, etc. In this way, we
provide the most comprehensive glass processing solution and
windows & doors solution for domestic and foreign customers
well.So far, we have independently produced Insulating Glass
Production Line,Insulating Glass Sealing Robot, Spacer Bending
Machine , Desiccant Filling Machine, Butyl Extruder Machine,Glass
Cutting Machine, its technology and quality have reached the
highest leading level in China. Until 2019, we exported glass
machines and materials to America, South America, Europe, the
Middle East, India and so on, nearly 30 countries and regions. We
have established a perfect international business relationship with
10 powerful agents and made an endeavor together to build a famous
international brand to the world.
Kation-Tech, with craftsmanship, profession and honesty, wins the
future with you together!
