Active Member
|
[China]
Address: No. 23, Dongzhi Rd, Guangzhou Development District, Guangzhou, Guangdong, China.
Contact name:Nicole Weng
Guangdong Shengyu Cable Industry Co., Ltd. |
|
|
Universal XLPE Insulated Low Voltage Power Cable For Power Transmission
POWERHARD RV U-1000 R2V cable has been specially designed for low voltage industrial-type connections, urban grids, building installations, etc. It can be buried or installed in a tube as well as outdoors without requiring additional protection. Lastly, the POWERHARD® RV / U-1000 R2V cable can withstand damp conditions including total immersion in water (AD7).
Electrical performance
LOW VOLTAGE 0,6/1kV
Standard
IEC 60502-1 / UNE 21123-2 / NF C 32-321
Approvals
CE
BUREAU VERITAS
NF-USE
RoHS
Construction Product Regulation
Eca
Thermal performance
Maximum service temperature: 90ºC.
Maximum short-circuit temperature: 250ºC (max. 5 s).
Minimum service temperature: -40ºC (fixed and protected installations).
Fire performance
Flame non-propagation based on UNE-EN 60332-1 and IEC 60332-1.
Reduced emission of halogens. Chlorine <15%.
Mechanical performance
Minimum bending radius: x5 cable diameter.
Impact resistance: AG2 Medium severity.
Chemical performance
Chemical & Oil resistance: Good.
UV Resistant: UNE 211605 and NF-C 32-323.
Water performance
Water resistance: AD7 Immersion.
Other
Meter by meter marking.
Installation conditions
Open Air.
Buried.
In conduit.
Applications
Industrial use.
Distribution network.
Conductor
Electrolytic copper, class 1 (up to 4 mm2) or class 2 (from 6 mm2) based on EN 60228 and IEC 60228.
Insulation
Cross-linked polyethylene (XLPE).
The standard identification of insulated conductors is the following:
1 x Natural
2 x Blue + Brown
3G Blue + Brown + Green/yellow
3x Brown + Black + Grey
4G Brown + Black + Grey + Green/yellow
4x Brown + Black + Grey + Blue
5 G Brown + Black + Grey + Blue + Green/yellow
Outer sheath
Flexible PVC, black colour.
Technology
1. Conductor
Electrolytic copper, class 1 (up to 4 mm2) or class 2 (from 6 mm2) based on EN 60228 and IEC 60228.
2. Insulation
Cross-linked polyethylene (XLPE)
The standard identification of insulated conductors is the following:
1 x Natural
2 x Blue + Brown
3G Blue + Brown + Yellow/Green
3x Brown + Black + Grey
4G Brown + Black + Grey+ Yellow/Green
4x Brown + Black + Grey + Blue
5 G Brown + Black + Grey + Blue + Yellow/green
3. Outer sheath
Flexible PVC, black colour.
