Hunan Speed Carbide Tools Co.,Ltd |
Verified Suppliers
|
|
TNMG160404R VF TNMG160404L 160401/02/08 TNGG Cermet Inserts Turning Tools Ceramic Blades CT3000
Advantages:
Specification:
Brand | Speed |
Model | TNMG160401/160402/160404/160408 |
Color | silver color |
Workpiece | Steel, stainless steel, metal |
Type | Turning Tools |
Package | 10pcs/box |
Coating | pvd and cvd |
Weight | 18g |
Usage | External Turning tools |
Hardness | 20-65HRC |
Material | Tungsten Cardide Inserts |
Processing Type | Medium Cutting |
Application:
Our TNMG/TNGG tungsten carbide cermet inserts is made of
imported base material with advanced high precision, which enhances
the quality of the blade, high hardness, good ductility, high
finish, thick coating, stable performance and improves the
processing efficiency. The unique coating process, fine and smooth,
no drip marks, reduce surface friction, so that the cutting
resistance is smaller. The high heat resistance and cobalt rich
gradient structure cemented carbide matrix makes TNMG/TNGG tungsten
carbide cermet inserts have a series of excellent properties such
as high hardness, wear resistance, good strength and toughness. The
TNMG/TNGG cermet blades are sintered at 5000 ℃ to remove
impurities, and sprayed by 1000 ℃ stress accumulation. The unique
coating process makes the processing more stable, smooth cutting,
good chip removal performance, not easy to produce chip buildup,
and the processing surface has good smoothnes. And the cermet
carbide inserts are sharp and thick, so that the cutting speed is
fast but not easy to break. It has wide range of application,
applicable to step surface processing, model profiling processing,
grooving cutting, slope processing.
please send me your requirements to us, we will recommend the best
suitable grade.
Products Detail:
Production Line
Advanced equipments to ensure steady quality
1. We use imported German Dorst machine to produce, which with high
precision and smooth surface.
Insepction conducted in all production procedure
2. Each piece will have 3 times quality check before shipment, to make sure stable quality.
Note:
1. TNMG cermet carbide turning inserts shall not be bumped or
dropped on the ground and please be handled with care.
2. Before installing the TNMG cermet carbide turning blade, please
confirm the performance and use of operation table, and the cutting
direction indicated by the arrow of the inserts is consistent with
the rotation direction of the operation table. Please pay attention
to don't install in the opposite direction. The wrong installation
direction may cause the blade serrations to fall off, in case of
accidents.
3. After installation, it is necessary to confirm whether the
center hole of the TNMG cermet carbide inserts is firmly fixed on
the flange of the saw table. If necessary, put on a spacer, then,
push it lightly by hand to confirm whether the blade rotates
eccentrically.
4. When using, do not exceed the specified high speed.
5. When not using, please hang the TNMG cermet inserts upright on a
dry rack.
Common questions:
1. Flank wear:
Effect: Gradual change in workpiece size or loss of surface finish
Reason: Linear speed is too high, and reach to service life of the
tool
Measures: Adjust the processing parameters, such as reducing the
linear speed and changing to inserts with higher wear resistance
2.Breakdown problem:
Effects: Sudden changes in workpiece size or surface finish, causes
sparks and surface burrs
Reason: Inappropriate setting of processing parameters,
inappropriate selection of blade material, poor workpiece rigidity,
or unstable blade clamping
Measures: Check whether the parameter settings are reasonable, and
select the corresponding tool according to the workpiece
3. Severely broken: (a very bad form of failure)
Effect: sudden and unpredictable occurrence, resulting in scrapped
tool holder material or defective workpiece and scrapped
Reason: The processing parameters are set incorrectly, the
vibration tool workpiece or the insert is not installed in place
Measures: Set reasonable processing parameters. The feed rate and
cutting should be reduced, the corresponding machining insert
should be selected, and the rigidity of the workpiece and insert
should be strengthened.
4. Built-up edge:
Effects: Inconsistent workpiece dimensions and poor surface finish.
Fluff or burrs adhere to the workpiece surface
Reason: The cutting speed is too low, the feed is too low, and the
blade is not sharp enough
Measures: Increase the cutting speed and use a sharper insert for
the feed