Corrugated Fluet Laminating Machine for paper ZGFM1700 380V

Product Description

1.1Performance characteristics:

A .Cardboard laminate with corrugated or cardboard laminate with cardboard.

B. Automatic detection of top and bottom paper, automatic servo correction technology. Make the top paper automatically track and fit the bottom paper, and the accuracy is high.

C. The bottom paper feeding part use imported servo motor controlling system, with Japan NITTA suction belt and big air blower to ensure smooth feeding of 2ply, 3ply, 4ply, 5ply and cardboard.

D. The multifunctional rack of the bottom paper are suitable for curved corrugated.

E. Stainless steel glue roller with fine anilox grinding to guarantee even glue coating even at min glue quantity.

F. Use a circulating glue system to reduce glue loss and stabilize glue adhesion effect.

G. One -click adjustment of the whole machine (just enter the paper size).

H. Automatic paper collection and manual paper collection can be converted at any time.

I. Video monitoring (optional).

Parameters

1.2 Structure:

A. Top sheet Feeder: It can send stacks of 120-800gsm paper from above.

B. Bottom sheet feeder: It can send 0.5~10mm Corrugated/paperboard from below.

C. Gluing mechanism: The glued water can be applied to the fed paper. Glue roller is stainless steel.

D. Calibration structure-Fits the two papers according to the set tolerances.

E. Pressing Conveyor: Presses the attached paper and conveys it to the delivery section.

The frames of this series of products are all processed at one time by a large-scale machining center, which ensures the accuracy of each station and ensures more stable operation of the equipment

1.3 Principles:

The top sheet is sent out by the upper feeder and sent to the start detector of the positioning device. Then the bottom sheet is sent out; after the bottom paper is coated with glue, the top paper and the bottom paper are respectively conveyed to the paper Synchronous detectors on both sides, after the detection, the controller calculates the error value of the top and bottom sheet, servo compensation device on both sides of the paper adjusts the paper to a predetermined position for splicing, and then pressurizes the conveying. The machine presses the paper and conveys it to the delivery machine to collect the finished product.

1.4 Applicable materials for laminating:

Paste paper --- 150 ~ 800g/m thin paper, cardboard.

Bottom paper---≤10mm corrugated ≥300gsmpaperboard, single-sided cardboard, multi-layer corrugated paper, pearl board, honeycomb board, styrofoam board.

Glue - resin, etc., PH value between 6 ~ 8, can be applied to the glue.

Structural features:

Adopting the world's leading transmission control system, input paper size and system will auto-tuning

Computerized high-speed laminating, up to 12,000 pieces per hour.

Stream-type air supply head, with four sets of forward nozzles and four sets of suction nozzles.

Feed Block adopts low stack cardboard, which can fit the paper to the pallet, and can install track-assisted pre-stacker

Use multiple sets of sensors to detect the advance position of the bottom line, and make the servo motor on both sides of the top paper to independently rotate to compensate the upper and lower paper alignment, which is accurate and smooth.

Full-function electronic control system, using human-machine interface and PLC program model display, can automatically detect operating conditions and work records.

Automatic glue replenishment system can automatically compensate for lost glue and cooperate with glue recycling.

ZGFM high speed laminating machine can be connected with automatic flip flop stacker to save labor.

FEATURES

1.BOTTOM SHEET FEEDING

Use imported Servo motor electric controlling system, with Japan NITTA suction belt to make suction power inverter, and belt cleaned by water roller; Patented technology to ensure corrugate and cardboard goes out smoothly and simple operation.

5.Transmission System

Photocell together with Parker Dynamic module and Yaskawa Servo system ensure the accuracy of orientation of top and bottom paper. Stainless steel glue roller with fine anilox grinding to guarantee even glue coating even at min. glue quantity.

7. TOUCH SCREEN OPERATION SYSTEM

It adopts the centralized control of the touch screen, realizes the man-machine dialogue with the high-resolution man-machine interface, and realizes the real-time dynamic monitoring of operation and fault, making it more convenient to adjust and troubleshoot.

OPTIONS:
1.LEADING EDGE FEEDING SYSTEM

Lead edge ensure thick corrugated board like 5 or 7 layers run smoothly even under very curing condition.

2.SHAFTLESS SERVO FEEDER

Shaftless servo feeder is utilized for extra long sheet at flexible motion.

Machine transport and packing

Our Services
We provide 12 months warranty. During warranty, we provide free technical support and free normal spare parts for replacing, except for man-made damage.We can go to your country to debug machine when you have questions can not resolve,but you must pay 100usd/day to our engineer.
Innovo look forward to long term cooperation with customers, we will make best service and aftersales service for all of our customers.
Company Information
*With 10 years' Experience
*Having ISO 9001-Certified Factory
*Strong R&D capability
*High Quality Guaranteed
*First Class Service And Best Prices
*Primary products:
Automatic High Speed Flute Laminater
ZXSCM book case making machine
650UV Coating Machine
ZX-650C Manual Paper Pasting Machine
Box Making Machine
Hot Melt Gluing Machine and Gluing Machine
Table Gluing Machine
Paper Pressing Machine.etc
Welcome to visit our factory!
​