|
[China]
Trade Verify
Address: No 31 Zhongning Road, Mingguang City, Anhui Province, China
Contact name:Tracy Feng
Anhui Innovo Bochen Machinery Manufacturing Co., Ltd. |
|
Verified Suppliers
|
|
|
Automatic 5ply Servo Flute Laminator machine at 150m/min
Performance characteristics
● This machine can laminate combination of two corrugated boards and any type of top sheet together. It can produce two -layer board (cardboard + cardboard), 3ply,4ply, 5ply, 7ply and other products.
● Large stainless steel glue roller(160mm) with fine anilox grinding to guarantee even glue coating even at min glue quantity.
● The dual -use lifting platform, we can use the pre-stacker structure to push the pre -pile of paper into the platform. We can also push the stack of paper directly into the platform.
● Special polyethylene materials on the surface of the coating roller and pressure roller, glue is automatically dropped off, free scrubbing.
● Use a circulating glue system to reduce glue loss and stabilize glue adhesion effect.
● One -click adjustment of the whole machine (just enter the paper size).
ANHUI INNOVO BOCHEN MACHINERY MANUFACTURING CO., LTD . Our company was founded in 2012, with 30000 square meters workshop. We are a professional company that develops and produces Automatic flute laminating machine, Automatic flip flop stacker machine and Automatic pile turning machine and so on. All machines can be customized according to customers' special requirements.
SPECIFICATION:
| MODEL | SFC-1500 | SFC-1700 | SFC-1900 |
| Max Sheet | 1500×1500mm | 1700×1700mm | 1900×1900mm |
| Min Sheet | 360×380mm | 360×400mm | 500×500mm |
| Top Paper Thickness | 120-800g | 120-800g | 120-800g |
| Max Speed | 150m/min | 150m/min | 150m/min |
| Fitting Precision | ±1mm | ±1mm | ±1mm |
| Machine Power | 22KW | 25KW | 27KW |
| Bottom Paper Thickness | ≤10mm(A-F corrugated board) ≥300g cardboard | ≤10mm(A-F corrugated board) ≥300g cardboard | ≤10mm(A-F corrugated board) ≥300g cardboard |
BRANCH INTRODUCTION:
1. BOTTOM PAPER FEEDING
Both bottom feeding part adopt lead edge feeding, the wheels
use unidirectional bearing (reduce the wear of rubber wheels). The
wide rubber wheels ensure that the E, F, and G corrugated does not
deform.
2. TOP SHEET FEEDING MECHANISM
Equipped with high speed feeder, and together with Becker vacuum
pump. The front and rear of feeder are controlled by the servo
motor. After input paper size, it will be automatically positioned.
Both paper lifting and forwarding sucker can freely adjust to
ensure that whether thick or thin
paper can be delivered rapidly and smoothly.
3. ELECTRICAL SYSTEM
Mainly using Siemens electric system to ensure machine stability,
high efficiency and low failure. Using man-machine interface and
PLC combination, display all the information on the screen.
4. PRE-STACK PART
Pre-stack pile of paper under the condition of non-stop, improve
efficiency. The width of the pre-stacker is controlled by the
motor, the size of the paper is automatically positioned. The dual
-use lifting platform, we can use the pre-stacker structure to push
the pre -pile of paper into the platform. We can also push the
stack of paper directly into the platform. And the platform can be
adjusted around the actual situation of the paper stack.
5. POSITIONING SYSTEM & GLUE ROLLER
Equipped with sensors and servo motor, control top sheets to do independent compensation action to make sure high accuracy. The design of large stainless steel anilox roller (160mm in diameter) is stable and high-efficiency, coat evenly and save glue volume.
Use a circulating glue system to reduce glue loss and stabilize glue adhesion effect.
