1700mm Servo Automatic Flute Lamination Machine For Cardboard And Corrugated Paper

1700mm Servo Automatic Flute Lamination Machine For Cardboard And Corrugated Paper

Function
It can match paper with cardboard and make it increase material strength and thickness or special effect by die-cutting After forming into packaging boxes, billboards and other USES.

Structure
A. Paper feeding machine: it can send piles of 150 ~ 800gsm paper from the top.
B. Paper feed on the bottom board: the cardboard of 0.5-1omm can be sent from the bottom.
C. Gluing mechanism: the adhesive can be applied to the paper.
D. Gauge mechanism - affixes two sheets of paper to the set tolerance level.
E. pressure conveyor...Press the attached paper and transfer it to the receiving section.

Specifics:

BRANCH INTRODUCTION:
1. BOTTOM PAPER FEEDING

Use imported Servo motor electric controlling system, with Japan NITTA suction belt to make suction power inverter, and belt cleaned by water roller; Patented technology to ensure corrugate and cardboard goes out smoothly and simple operation.
 

2. TOP SHEET FEEDING MECHANISM

Equipped with high speed auto dedicated feeder, both paper lifting and feeding nozzle can freely adjust angle to the paper, to ensure that whether thick or thin paper can be delivered rapidly and smoothly.
 

3. ELECTRICAL SYSTEM

Designed in the accordance with European CE requirement, ensure machine stability, high efficiency and low failure. Using man-machine interface and PLC combination, display all the information, such as warning, error detect, failures, and operating speed, etc on the screen at a glance.

4. PRE-STACK PART

Pre-stack pile of paper under the condition of non-stop, improve efficiency.
The special design of the pre stack paper frame, save time and effort.
 

5. TRANSMISSION

With imported double teeth belt drive and Switzerland ROSTA tension device ensure the drive accurate, stable and low noisy.
 

6. POSITIONING SYSTEM & GLUE ROLLER

The use of multiple sets of photoelectric sensor at bottom sheets relative position, control top sheets on both sides of the servo motor to do independent compensation action, so that accurate positioning of top paper and the bottom paper.

Stainless steel roller, never rust, after narrowly grinding, guaranteed the minimum amount glue coated evenly.
Down roller be cleaned by water roller.

7. TOUCH SCREEN OPERATION SYSTEM

It adopts the centralized control of the touch screen, realizes the man-machine dialogue with the high-resolution man-machine interface, and realizes the real-time dynamic monitoring of operation and fault, making it more convenient to adjust and troubleshoot