OUCO (Wuxi) Injection Molding Machinery Equipment Co., Ltd. |
Verified Suppliers
|
|
OUCO CWI-360GK Injection Plastic Molding Machine, the digital
control system uses a dedicated controller, multiple CPU processing
units multi-function automatic fault detection, and an alarm
system. Which can verify much more processing program molds, and
has a remote control interface.
Infrared heating, fast temperature rise, and good thermal
insulation effect. Stable machine performance and high
energy-saving rate.
The tie rods are made of high-quality structural alloy steel plated
with hard chromium, with high mechanical strength and fatigue
strength.
Product Advantages
Advantage of the improved clamping unit and machine structure:
Platen design by finite element analysis to eliminate deformation
and fracture and optimise toggle locking system.
Advantage of the injection unit: The double cylinder structure on
the injection unit can ensure cantering performance of the nozzle
and seal betten between mould and nozzle, so no plastic leaks.
Higher injection accuracy, low coefficient friction and more
uniform during injection and plasticising process; easy to adjust
and greatly reduce movement inertia during injection, hence improve
injection speed and plasticising capacity.
Advantage of computer control unit: Our European computer control
unit has high speed CPU and DSP module and it increases high
control to analogue output module, back plane module, bus module
etc. and has fast response.
Advantage of plasticising unit: Adopt high quality material barrel
screw, plastic melting is fast, so reduces melting time. Injection
nozzle and front flange connection design is inside position,
result in better connection, hard to leak and can withstand high
pressure and high speed injection.
Advantage of enclosed slide door: The fully enclosed slide door
could effectively prevent foreign matter enter the clamping unit,
and is beautiful and more secure. Mechanical safety door use brakes
device or brake line, it is safe and reliable, flexible and
convenient.
Advantage of the hydraulic unit: Unique hydraulic circuit design
using cartridge valve plate. It has fast response time, pressure
and speed control is precise, so higher product precision and
repeatability.
Parameters
MODEL | CWI-360GK | ||||
CLAMPING UNIT | clamping force (kN) | 3600 | |||
Tie bar distance W×L (mm) | 740*740 | ||||
Max.Daylight(mm) | 680 | ||||
Max. mold thickness (mm) | 720 | ||||
Min. mold thickness(mm) | 260 | ||||
Platen Dimensions W×L (mm) | 1090*1090 | ||||
Ejector Stroke(mm) | 200 | ||||
Ejector Force(Kn) | 80 | ||||
Ejector Quantily | 13 | ||||
Injection unit | 1100I | ||||
Injection Unit | Screw Diameter(mm) | 55 | 60 | ||
Screw L/D ratio | 21 | 19.3 | |||
Theoretical injection volume (cm3) | 589 | 701 | |||
Shot Weight (PS) g | 542 | 645 | |||
Injection Pressure(MPa) | 191 | 160 | |||
Injection Speed (mm/s) | 294 | ||||
Injection Rate (cm3/s) | 698 | 831 | |||
Screw Speed (rpm) | 300 | ||||
Other | Motor Power (Kw) | 50+50 | |||
pump capacity(L/min) | 500 | ||||
Heater Power (Kw) | 15.9 | ||||
Machine Weight (kg) | 14 | ||||
Machine size L×W×H (mm) | 7100x2100x2175 |
Detail Pictures
Company Profile