OUCO (Wuxi) Injection Molding Machinery Equipment Co., Ltd. |
Verified Suppliers
|
|
Advantage of OUCO Injection Molding Machine
OUCO Injection Molding Machine is equipped with the two
platen clamping system.The clamping speed is fast and
improves the product cycle. The good quality of material also
ensures the mold platen more durable
Four cylinder direct clamping structure ensures the high pressure
stability. Clamping balance and precise of clamping force which
improves the lifetime of the mold.
Product Parameters
Model | 900T | 1000T | 1400T | 1850T | 2200T | |||||||||||
Screw Model | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | |
Screw di ameter | mm | 90 | 100 | 110 | 100 | 100 | 120 | 110 | 120 | 130 | 125 | 135 | 145 | 135 | 145 | 155 |
Screw L/Dratio | 22 | 22 | 22 | 22 | 22 | 22 | 22 | 22 | 22 | 22 | 22 | 22 | 22 | 22 | 22 | |
Theoretical injection capacity | cm3 | 3147 | 3886 | 4702 | 4329 | 4329 | 6104 | 5177 | 6161 | 7230 | 8034 | 9371 | 10811 | 10015 | 11553 | 13202 |
Shot weight (PS) | g | 2896 | 3575 | 4326 | 3900 | 3900 | 5616 | 4763 | 5668 | 6652 | 7391 | 8621 | 9946 | 9213 | 10629 | 12146 |
Injection rate(Ps) | g/S | 975 | 1204 | 1457 | 920 | 920 | 1325 | 1651 | 1384 | 1628 | 1275 | 1488 | 1717 | 1647 | 1932 | 2208 |
Injection pressure | MPa | 214 | 173 | 143 | 204 | 204 | 142 | 197 | 165 | 141 | 197 | 169 | 146 | 187 | 162 | 142 |
Injection stroke | mm | 495 | 540 | 545 | 655 | 700 | ||||||||||
Max. injection speed | mm/s | 146 | 137 | 130 | 130 | 124 | ||||||||||
Screw speed | r/min | 0-180 | 0-180 | 0-180 | 0-160 | 0-150 | ||||||||||
Sys. Pressure | MPa | 16 | 16 | 16 | 16 | 16 | ||||||||||
Pump Motor(Min-Max) | kW | 141 | 151 | 178 | 210 | 235 | ||||||||||
Displacement | ml/r | 125+125+125 | 160+125+125 | 160+160+160 | 160+160+125 + 125 | 125+125+125+125+125 | ||||||||||
number of Motors | PC | 3 | 3 | 3 | 4 | 5 | ||||||||||
Heater power | kW | 59 | 61 | 68 | 89 | 115 | ||||||||||
Number of temp, control zones | 5+1 | 6+1 | 7+1 | 8+1 | ||||||||||||
Clamping force | kN | 9000 | 10000 | 14000 | 18500 | 22000 | ||||||||||
Opening stroke | mm | 1500 | 1700 | 1900 | 2300 | 2500 | ||||||||||
Space between tie bar | mmxmm | 1120x1030 | 1210x1060 | 1460x1320 | 1620x1460 | 1760x1560 | ||||||||||
Min. mold thickness | mm | 450 | 500 | 700 | 750 | 750 | ||||||||||
Max. mold thickness | mm | 1150 | 1200 | 1400 | 1600 | 1750 | ||||||||||
Ejector stroke | mm | 270 | 300 | 350 | 400 | 450 | ||||||||||
Ejector force forward | kN | 152 | 196 | 251 | 332 | 425 | ||||||||||
Number of ejector bar | PC | 1+16 | 1+16 | 1+28 | 1+28 | 1+28 | ||||||||||
Oil tank capacity | L | 1190 | 1300 | 1530 | 2210 | 2550 | ||||||||||
Machine dimensions(LxWxH) | mxmxm | 10.2x2.2x2.5 | 10.7x2.4x2.8 | 14.8x3.6x33 | 15x3.2x3.5 | 18.5x3.6x3.7 | ||||||||||
Machine weight | Ton | 39 | 44 | 70 | 100 | 140 |
Our lubricating pipes are equipped with copper pipes, which are resistant to wear and increase service time
OUCO's injection machine is Screw-type
Our factory is equipped with finishing equipment, castings are processed by ourselves, which reduces product cost.