Active Member
|
[China]
Contact name:
Qingdao GuanRui Carbon Fiber Technology Co,.Ltd |
|
Advantage Of The Soft Heating Film
(1).There is air layer between the copper bar and sliver paste, lead to a potentially dangerous of providing spark.The production of TTWARM is completely sealed and or vacuo by the silver -coated copper wire, synthon and high polymer(molecular) material.
(2).The temperature resistance is from 90 -130 degrees.
The range of TTWARM can reach to 210 degrees or above.
(3). The experiment life is long.
TTWARM has an experimental life of more than 100,000 hrs(hours).
(4). The heating method different. It is easy to generated trap heat phenomenon when it using plate heating.
The 360-degree stereo heating, which is hard to the formation of trap heat
(5). PET film is using an EVA copolymer adhesive that double layer glued together, which it can be torn by external force .
The TTWARM ‘s electrothermal film is a synthesis with high temperature, so it cannot be torn.
The scope of the soft heating film.
There are a wide variety of derivatives:
The derivatives of carbon fiber electrothermal film include: carbon fiber heating wallpaper, carbon fiber flexible heating fresco, carbon fiber flexible heating curtain, carbon fiber physiotherapy instrument and so on.
Moisture resistance:
The flexible film is waterproof as a whole. After 48 hours of immersion, it can withstand high pressure test above 3750V, and its performance is normal and no leakage phenomenon. Therefore, it can be used in a wet condition, but we should pay attention to the insulation and waterproof treatment of the connecting part and the cutting part.
Resistance to high pressure:
The flexible film can withstand the test voltage up to 3750V, without breakage.
Anti aging:
The flexible film materials are made of special special material, with good characteristics, anti aging, no deterioration, stable performance, and the service life of the same age.
Why choose the heating film for the floor and not a heating cable?
The heating film is evenly distributed in the floor (without gaps), which means that it better transfers heat onto the floor surface. Thermal control is also more precise. The heating cable can be installed only in the concrete layer. The heating film is installed directly under the flooring with all types of floor coverings (except for tiles). In addition, the installation of the film is much easier on principle and also faster in terms of your house construction.
Are heating films also suitable for apartments?
Definitely yes. They are a perfect solution for example for bathrooms where you want to have the floor heated up at the lowest possible cost.
