WUHAN GLOBAL SENSOR TECHNOLOGY CO., LTD. |
Verified Suppliers
|
|
Tiny Size Uncooled Infrared Camera Core 640x512 12um for UAV
Payloads
As a leading manufacturer of cooled uncooled infrared detectors
& thermal modules, Global Technology developes a tiny size and
lightweight infrared thermal imaging core iTL612R Pro, which
is the compact version of infrared camera core iTL612R.
Fully oriented for SWaP-C (size-weight-and- power-cost), the size
and weight of iTL612R Pro infrared camera core has already been at
the forefront in the industry.It is the best choice for customers who have restrict requirements
on size and weight when integrating their own drones.
Providing 640×512/12μm self-developed wafer-level infrared
detector, lens protection grade IP67, imaging and temperature
measurement version, and various SDK solutions, the iTL612R Pro
thermal module responds to space constraints with smaller size and
lighter weight, achieves longer battery life with lower power
consumption, overcomes integration problems in the consumer
electronics field, and provides more solutions for compact and
portable products.
It is specially developed for the field of Predictive Maintenance,
Photovoltaic Inspection, Environmental Protection, Scientific
Research, Aerial Photography, Police Investigation, Disaster Relief
& Rescue, Forest Fire Prevention, Urban Safety etc.
Compact & Lightweight Design
• Size: 17mm×17mm×22mm (with 9.1mm lens)
• Weight: 13g (with 9.1mm lens)
• Power consumption as low as 0.7W
Clear Image & Accurate Radiometry
• Brand new image process algorithm: NUC/3DNR/DNS/DRC/EE
• Support Windows/Linux/ARM SDK
• Support regional, point & isotherm temperature measurement
Various Interfaces for Easy Integration
• DVP/LVDS/USB2.0 interfaces, RAW/YUV image data output, serial
port control
Model | iTL612R Pro |
IR Detector Performance | |
Sensitive Material | Vanadium Oxide |
Resolution | 640×512 |
Pixel Size | 12μm |
Spectral Range | 8~14μm |
Typical NETD | ≤40mk |
Image Processing | |
Frame Rate | 30Hz |
Start-up Time | 5s |
Digital Video | RAW/YUV/BT656 |
Image Algorithm | Non-uniformity Correction (NUC) 3D Noise Reduction (3DNR) De-noise (DNS) Dynamic Range Compression (DRC) Edge Enhancement (EE) |
Image Display | Black Hot/White Hot/Pseudo Color |
PC Software | |
ICC Software | Module Control & Video Display |
Electrical Specifications | |
Standard External Interface | 30Pin_HRS: DF40C-30DP-0.4V(51), (HRS, Male) |
USB Expansion Board | Type-C |
Communication Interface | RS232-TTL/USB2.0 |
Digital Video Interface | CMOS8/USB2.0 |
Supply Voltage | 4.0-5.0V V VDC |
Typical Power Consumption | 0.7W |
Temperature Measurement | |
Operating Temperature Range | -10°C~+50°C |
Temperature Measurement Range | -20°C~+150°C, 0°C~550°C; Support Customization and Expansion |
Temperature Measurement Accuracy | Greater of ±2°C or ±2% (@23℃±3℃) |
Regional Temperature Measurement | Support Maximum, Minimum and Average Value of the Output Regional Temperature |
SDK | Support Windows/Linux/ARM; Achieve Video Stream Analysis and Conversion from Gray to Temperature |
Physical Characteristics | |
Size (mm) | 17×17×22 (With 9.1mm Lens) |
Weight | 13g (With 9.1mm Lens) |
Environmental Adaptability | |
Operating Temperature | -40°C~+70°C |
Storage Temperature | -45°C~+85°C |
Humidity | 5%~95%, Non-condensing |
Vibration | 5.35grms, 3 Axis |
Shock | Half-sine Wave, 40g/11ms, 3 Axis 6 Direction |
Certificates | ROHS2.0/REACH |
Optics | |
Optional Lens | Fixed Focus Athermal: 9.1mm |
The iTL612R Pro thermal imaging module can be integrated into UAV
payloads and wearable devices so that is widely used in fields
of Predictive Maintenance, Photovoltaic Inspection, Environmental
Protection, Scientific Research, Aerial Photography, Police
Investigation, Relief & Rescue, Forest Fire Prevention, Urban
Safety etc.
1. How does uncooled focal plane array microbolometer work?
By using the principle of infrared radiant thermal effect, the
uncooled infrared detector converts infrared radiation energy into
heat energy with infrared absorption material, so that the
temperature of the sensitive material increases. Then, a certain
physical parameter of the sensitive material changes accordingly
and converts into electrical signal or visible light signal through
a certain conversion mechanism designed to realize the detection of
the object.
2. What's the advantage of uncooled infrared detector?
Uncooled infrared focal plane detector does not need an Integrated
Dewar Cooler Assembly (IDCA) device and can work at room
temperature. It has the advantages of fast start, low power
consumption, small size, light weight, long life, low cost and so
on. Although the sensitivity of uncooled infrared focal plane
detector is not as good as that of cooled infrared detectors, after
years of development, its cost performance has been obviously
better than the cooled detector, which has a broader application
prospect.
3. Classification of Infrared Focal Plane Arrays
According to the cooling method, infrared focal plane array can be
divided into cooled and uncooled thermal imaging detectors. The
cooled FPA infrared detector mainly adopts Dewar bottle/quick start
throttling refrigerator and Dewar bottle/Stirling cycle
refrigerator at present. While the uncooled FPA thermal IR detector
works at room temperature. It is the core of uncooled thermal
imaging system. The most common heat-sensitive materials include
vanadium oxide (Vox) and amorphous silicon (a-Si). Vanadium oxide
material is the mainstream choice in the current market; it has a
high temperature resistance coefficient, and high thermal
sensitivity.