|
Trade Verify
Address: No. 251, Wenji Road, Songjiang District, Shanghai China
Contact name:Jason Zhang
Shanghai Huitian New Material Co., Ltd |
|
Verified Suppliers
|
|
|
5297 is a 1:1 two-component addition-type potting silicone rubber, with 1.5 W /m·K thermal conductive, flame retardant.
Applications
All kinds of electrical components of thermal conductivity, flame
retardant potting, such as photovoltaic inverters, LED drive
power.charging piles, automotive electronics, NEV power,
controllers etc.
Product Features
1) High thermal conductivity and flowability
2) Both room temperature and heat curing
3) Good weather and aging resistance
4) Excellent insulation properties
5) Flame retardant UL94V-0
6) Maintains rubber elasticity from -50°C to 200°C
7) RoHS Directive
Technical parameters
| Reference standard1 | Item | Unit | Value |
| Properties before curing (25±2℃, 60±5%RH) | |||
| Q/HTXC 2 | Appearance (A) | - | Grey fluid |
| Appearance (B) | - | White fluid | |
| GB/T2794 | Viscosity (A) | mPa·s | 3,500-4,500 |
| Viscosity (B) | mPa·s | 3,000-4,000 | |
| GB/T13354 | Viscosity (A) | g/cm3 | 2.55±0.05 |
| Viscosity (B) | g/cm3 | 2.55±0.05 | |
| Properties after curing (25±2℃, 60±5%RH, A:B=1:1) | |||
| Q/HTXC 2 | Operating time | min | ＞30 |
| Q/HTXC 2 | Curing time (25℃) | h | ≤3 |
| Q/HTXC 2 | Curing time (80℃) | min | 30 |
| GB/T 531 | Hardness (Shore A) | -- | 30-40 |
| Q/HTXC 2 | Dielectric strength | KV/mm | ≥18 |
| Q/HTXC 2 | Volume resistivity | Ω·cm | ≥1.0×1014 |
| GB/T 528-92 | Tensile Strength | MPa | 0.94 |
| GB/T 528-92 | Elongation | % | 56 |
| GB/T 7124 | Shear Strength | MPa | 0.7 |
| GB/T 1034 | Water absorption | % | ＜0.1 |
| ISO 22007-2 | Thermal conductivity | W/(m·K) | 1.5±0.1 |
| ASTM E831 | CLTE @25-150℃ | μm/(m·℃) | 162.6 |
Cautions
Store the product in a sealed container, and keep it away from
children for storage.
The glue will not cure if exposed to a certain amount of the following chemicals:
Organic compounds of N, P, and S, ionic compounds of Sn, Pb, Hg, As, etc.;
Compounds containing alkyne and polyvinyl.
To avoid the above problem, Any residual rosin on the circuit board should be wiped clean when using the glue, and use soldering tin with low lead content.
This product is non-hazardous. Please consult the MSDS of the product for safety information.
Packaging
20kg/barrel
Huitian Addition-type potting production line
