|
Trade Verify
Address: No. 251, Wenji Road, Songjiang District, Shanghai China
Contact name:Jason Zhang
Shanghai Huitian New Material Co., Ltd |
|
Verified Suppliers
|
|
|
High bonding strength five minute epoxy glue for tire repair , epoxy glue for cars
New Partner AB Glue has cured at room temperature fast and can be directly bonded slightly oily surface, repairing leaking oil tank parts, tanks,pipes, flanges, transformers, heat sinks and other equipment. Can also be used for metal, ceramic,plastic, wood and mutual self-adhesive sticky.
Typical Usage
For bonding the assembly of automotive plastic panels, lamps,
electrical housing, elevators,electrical and other industrial
products.
Technical Data
| Properties before Curing | |||
| A | B | ||
| Appearance | Red | Green | |
| Mixing Ratio | 1 | 1 | |
| Properties after Curing | |||
| Curing Type | Room Temperature Curing ≥1.0 | ||
| Positioning time (25 ℃) | 5 ~ 8min | ||
| Temperature ranges | -55 ~ 120 ℃ | ||
| The maximum thickness of 0.2mm filling | |||
Tensile shear strength (Aluminum - aluminum) | ≥18MPa | ||
| Impact strength | ≥1.0J / cm2 | ||
| 180o peel strength | ≥2.3 N / mm
| ||
Precautions
the product has acrylic glue characteristic pungent odor, which
should be used with adequate ventilation. This product’ chemical
reaction occurred after mixing intensely, the gel’s amount should
not be too much, according to the amount of usage once the gel is
preferably 2 ~ 20g.This product curing speed, should be used first
piece is ready to be bonded, and construction should be completed
after the gel is positioned within 3 to 5 minutes. This product is
a two-component product,unused plastic cap should be covered seal,
A and B plastic cap cannot be covered in a wrong way.Avoid contact
of children eating the product.
Safety precautions for this product, please consult the product
safety data (MSDS).
Application Guide
Clean all surfaces to remove oil, impurities, dried,glue AB new
partner by volume of 1: 1 mix, spread
evenly on being glued pieces, positioning and applying acupressure
8 to 10 minutes to reach the positioning strength, 2 hours You can
reach more than 70% strength, 24 hours to complete the cure.
Storage conditions
This product should be in a cool, dry warehouse storage, avoid
direct sunlight, the best temperature is 8 ℃ ~ 25 ℃. Unused glue
should be sealed, so then the next. Highly contaminated glue bottle
can reload the original packaging, so as not to affect
theperformance of the bottle remaining glue.
Announcements
Keep away from children.
If product touch your eyes carelessly, wipe your eyes with cloth
before curing, then wash with water.
If product touches your skin carelessly, flush with water
immediately. We suggest using it in a place with
good ventilation.
The products safety data please read MSDS as reference.
Packing specification
80g/box, 100 boxes/carton.
20g/pack, 100packs/carton
20g/box, 300boxes/carton
