Oil Fume Resistant Cabinet Silent High Pressure Centrifugal Blower

High pressure oil fume resistant cabinet silent centrifugal fan

1. Features

► The air blower's structure

The air blower mainly composed .by the impeller, the cabinet, the inlet, the support and so on
(1) Impeller: 9-19 air blowers are 12 pieces of leaf blades, 9-26 air blowers are 16 pieces of leaf blades, it all belongs to forward curved. The impeller diffuser outflow boundary maximum circumference link speed do not surpass 140m/s, after the impeller forming, after static, the transient equilibrium adjusts, therefore revolves steadily.

(2) Cabinet: Welds the whole worm type shells with the ordinary steel plate.
(3) Inlet: Makes the restraining type streamline form the overall construction, fixes it with the bolt on the lap.
(4) Transmission group: composed by the main axle, the bearing box, the shaft coupling and so on. The main axle is made by the fine steel, bearing box overall construction. It uses the rolling bearing, the rolling bearing, with grease lubrication.

► Instructions

1. operating environment: below 1000 meters above sea lave!, below 80 degrees below the ambient temperature, more than 80 degrees can be customized, humidity is not greater than 80%.

2. there are four kinds of omnibearing installation bases for Installing 0or90 degrees. 180 degrees, 270 degrees, and the wiring diagrams of power supply and motor terminals.

► Matters needing attention

1. the current shall nol exceed the rated current of the nameplate when the fan is in operation;

2. the fan installation shall be equipped with the lack of phase and over-current protection device:

3. the fan turns to the tip of the tip on the volute；

4. the fan can not be opened or overloaded;

5. the fan is not allowed to extend into or out of the air inlet or air inlet when the tan is in operation.

2. Picture

3. Specification

4. Advantage