Active Member
|
[China]
Address: Room 103,3#Block,No.3 Xiaolong Road,Yuanshanbei Village,Changping Town,Dongguan City.China
Contact name:Aiden Zeng
Dongguan YiCun Intelligent Equipment Co.,Ltd |
|
|
Spraying Galvanized Color Steel Plate Experimental Test Chamber Temperature And Humidity Environment Simulation
Can be purchased according to demand :
1. Circulating wind selection: Patio air supply or variable speed
motor
If your product has special requirements for air supply wind speed,
this program is your best choice.
2. Water supply system selection: RO reverse osmosis
Our equipment to do the humidity, the use of pure water, that this
automatic way to make water without interruption to provide pure
water, so as to achieve easy and convenient results.
3. Polymer membrane / runner dehumidification system
If long-term low-temperature and low-humidity test conditions are
required, then the cellular dehumidification system is an option,
and the Humidity Range is required to achieve 10 ° C / 10% RH or
less.
4. LN2/LCO2
We provide complete specifications from the United States imports
of professional LN2 / LC02 solenoid valves and related control
systems to achieve your rapid cooling temperature of the test
requirements.
5. Ultrasonic cooling humidification system
If you have to carry out a dynamic test of high heating load under
high temperature and high humidity, the ultrasonic cooling and
humidification system is meeting the important requirements of this
strict requirement.
6. Added glass inner door and hand operated hole
For the often need to test the movement of objects and start.
(125mm * Ea) can be added to the glass door to avoid the impact of
the door opening on the test environment.
7. Instant access to test data recorder
When the need to test the environment at the same time and the
temperature of the multi-point measured object temperature
measurement records, increased load specification recorder is the
only choice to achieve the demand.
8. Computer connection operation recording software
When the software for the R & D of Metrology 's ring testing
machine, its powerful function can monitor and control the machine
at the same time, access to the information in the machine,
providing the most convenient
Specifications:
| Model | MHP-80 | MHP-150 | MHP-225 | MHP-408 | MHP-800 | MHP-1000 | |
| Interior Volume | 80L | 150L | 225L | 408L | 800L | 1000L | |
| Interior Dimension(cm) | 40*50H*40 | 50*60H*50 | 50*75H*60 | 60*85H*80 | 100*100H*80 | 100*100H*100 | |
| Exterior Dimension(cm) | 60*145H*155 | 70*150H*165 | 70*165H*170 | 80*175H*180 | 70*190H*185 | 70*190H*195 | |
| Net Weight | 150kg | 250kg | 300kg | 400kg | 600kg | 700kg | |
| Temp & Humidity Range | -70℃,-60℃,-40℃,-20℃,0℃～+150℃ | 10％～98％RH(Optional) | |||||
| Temp & Humidity Fluctuation | ±0.3℃～±0.5℃ | ±2.5％RH | |||||
| Temp & Humidity Deviation | ±0.5℃～±2℃ | ±3％RH(＞75％RH);±5％RH(≤75％RH) | |||||
| Temp Change Rate | 2℃～2.5℃/m heat-up | 1℃/m cool-down | |||||
| Standard configurations | 1 Window, 1 Cable port, 1 Lamp, 4 Casters, 1 Power cable, 2 Stainless steel shelves | ||||||
| Standard Documentations | quality certification,test report ,user operaion manual for machine & controller | ||||||
| Safety devices | Electric leakage, fan overheat ,anti-dry ,compressor overheat & overpressure,power supply undercurrent,overheat, overcurrent, phase sequence, over-temperature protection devices | ||||||
| Customizable zone | Size,Color,Coling System,Temperature Range(-70,-60,-40,-20 ~ +150°C | ||||||
Details Pictures
Precise circuit control
