|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Eva
Shenzhen Wisdomlong Technology CO.,LTD |
|
Verified Suppliers
|
|
|
IC697BEM733 is a Genius Remote I/O Scanner for the GE 90-70 Series
that mounts in a remote IC697 rack and interfaces IC697 I/O modules
to an IC66* bus. Features include a location distance of 7500 feet
or 2275 meters from the controller. It supports both discrete and
analog I/O modules as well as PCM, ADS, and analog expander
modules. The IC697BEM733 can handle up to 128 input/output bytes
per remote drop (comprised of a remote I/O scanner and the
corresponding modules). A remote drop can include a maximum of
eight racks, which are linked by a bus transmitter and a bus
receiver. Racks with 9 or 5 slots are appropriate. The distance
from the first rack to the last in a remote drop is no more than 50
feet or 15 meters.
The IC697BEM733 scanner can accommodate numerous combinations of discrete and analog inputs and outputs regardless of the number of racks in the drop. A remote drop can include all available IC697 discrete modules, analog modules, and analog expander modules. Bus Transmitter, Bus Receiver, PCM, and ADS modules can also be located in a remote drop. It is important to note, however, that a remote drop cannot have any I/O module interrupts, bus controllers, communications modules, or other modules dependent upon COMREQ instructions. The IC697BEM733 is designed for use in an IC697 PLC system, but any type of PLC or computer able to control an IC66* bus can function as host. Other possible hosts include IC660 PLCs, IC655 PLCs, and computers equipped with a PCIM, QBIM, or a third-party GENI-based interface.
| Module Type: | Remote I/O Scanner |
| Eff. Data Rate: | 38.4 Kbaud |
| Max Distance from Controller: | 7500 feet |
| Discrete Points Available: | 128 bytes per drop |
| Serial Ports: | 2 |
| Current Required: | 0.8 Amp |
| ModuleType | IC697RemoteI / OScannerI,C697BEM733 / 735 Module OK, I / O Enabled, Bus B Active Occupies single slot in IC697 remote rack One 15-pin RS-422 / 485 compatibleserial port, one 9-pin IC66* Hand-held Monitor port. 0.8 amps Daisy-chained bus cable; single twisted pair plus shield or Twinax. Fi- ber optics cable and modems can also be used. 75, 100, 120, or 150 ohm resistor at both ends of electrical bus cable. Configurable. 153.6 Kbaud standard, 153.6 Kbaud extended,76.8 Kbaud, or 38.4 Kbaud. 7500 feet (2275 meters) at 38.4 Kbaud, 4500 feet (1365 meters) at 76.8 Kbaud, 3500 feet (1060 meters) at 153.6 Kbaud extended, 2000 feet 605 meters) at 153.6 Kbaud, standard. Maximum length at each baud rate also depends on cable type. The IC66* I/O System User’sManual provides a complete list of cable types, showing correspondingbus lengths and baud rates. 32 devices at 153.6 Kbaud standard, 153.6 Kbaud extended, or 76.8 Kbaud. 16 devices at 38.4 Kbaud. Includes bus controller and Hand- held Monitor. Depends on baud rate as follows: Up to 20 fully-loaded drops, or up to 30 drops if not fully-loaded. Up to 20 fully-loaded drops, or up to 30 drops if not fully-loaded. Up to 10 fully-loaded drops, or up to 30 drops if not fully-loaded. |
| LEDs | |
| Size | |
| Ports | |
| Current Required from +5V Bus | |
| Bus Type | |
| Bus Termination | |
| BaudRate | |
| MaximumBusLength | |
Maximum Number of Devicesper Bus | |
| Maximum Number of RemoteDrops per Bus | |
| 153.6Kbaudextended | |
| 153.6Kbaudextended | |
| 76.8Kbaud |
Description:
The IC697BEM733 is a Remote I/O scanner module that is part of the
Series 90-70 Programmable Logic Controller (PAC) series formerly
manufactured by GE Fanuc Automation, now under Emerson Automation.
This module is a Remote I/O scanner that is provided with One
15-pin RS-422/485 compatible serial port, and One (1) 9-pin IC66*
Hand-held Monitor port. It also has an IC66* Bus terminal for bus
communication. This module supports installation 7500 feet (2275
meters) away from the controller and handles 128 Bytes of input and
output per Remote I/O drop.
