|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Eva
Shenzhen Wisdomlong Technology CO.,LTD |
|
Verified Suppliers
|
|
|
Ge Fanuc IC660TBD110 , Genius I/O Series Modules , Voltage Range Of 93 To 132 Volts AC
The IC660TBD110 terminal block is a terminal block for a 16-circuit terminal assembly. It is equipped with a 115 Volts AC voltage supply and the circuits of the assembly are discrete. They are isolated from one another and have an isolation voltage rating of 1500 Volts rms. This compact terminal assembly weighs 1.8 kilograms and it has a compact form factor. With normal operation, it dissipates 28 Watts of heat when all the 16 inputs are active. The terminal frequency with 16 active circuits ranges between 47 and 63 Hertz. It requires 80 milliamps of block current and an additional 200 milliamps of input circuit current to operate. There is a drop out in the power supply with each cycle. The IC660TBD110 terminal block is certified with different industrial standards. All of the 16 circuits have their own individual LEDs that illuminate when a circuit is active. A programmer port is present in the terminal to connect a human-machine interface module for easy programming.
The IC660TBD110 terminal block comes with diagnostic features that can detect open wire situations and short circuit situations in the terminal. The alarm function can be set to sound alarms for different events by the operators. In the case of open wire detection, 3 voltage levels that are made to sense the on, off, or open wire are activated. The alarm function should be added across the terminals during the installation process. The installation of the IC660TBD110 terminal block is easy. The threshold value and the resistor values can be adjusted as needed. The terminal block has the ability to sample an input for the time configured for that filter. The block can easily recognize if an input is in an active or passive mode.
The IC660TBD110 terminal assembly is a Genius I/O component manufactured by GE Fanuc for control and automation applications. The terminal assembly is compatible with several GE terminal block models and it includes 16 circuits with only inputs. The IC660TBD110 terminal assembly is equipped with status LEDs and with LEDs for each circuit. The circuit LED indicators are located on the logic side and they reflect each input circuit’s state. The terminal has an input to ground isolation voltage of 1500 Volts and operating voltage of 93 to 132 Volts AC. The input frequency of the product is 47 to 63 Hertz and its dropout time for the power supply includes 1 cycle with 16.7 milliseconds of dropout time at 60 Hertz and 20 milliseconds of dropout time at 50 Hertz.
The IC660TBD110 terminal assembly has an input processing time of 1 millisecond without a selectable filter time and it has the ability to determine a filter time within the range of 10 to 100 milliseconds. Also, the terminal includes diagnostics features for inputs like open wire detection and short circuit detection. The IC660TBD110 terminal assembly has a programmable threshold for the input off-state/on-state within the range of 25 to 85% and a typical input impedance of 11.6K Ohms. The input with an open wire has the same threshold as input off-state/on-state and the input with a shortened wire has a fixed threshold of 10 to 90%. The terminal block requires a current of 80 milliamps and it has an input circuit current of 200 milliamps. The terminal board of the IC660TBD110 terminal assembly is rated at 5 Amps for its input or feedthrough current.
| Brand | GE Fanuc |
| Series | Genius I-O |
| Part Number | IC660TBD110 |
| Block Type | 16 circuits, inputs only |
| Rated Voltage | 115 Volts AC Volts |
| Operating Voltage | 93 to 132 Volts AC |
| Frequency | 47 to 63 Hertz |
| Power Supply Dropout Time | 1 cycle |
| Heat Dissipation (Maximum) | 28 Watts maximum |
| Input to Ground Isolation | 1500 Volts |
| Dimensions (HxWxD) | 224 x 88 x 100 millimeters (8.8 x 3.5 x 3.9 inches) |
| Weight | 1.8 kilograms (4 pounds) |
| Operating Temperature | 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) |
| Storage Temperature | -40 to 100 degrees Celsius (-40 to 212 degrees Fahrenheit) |
