|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Eva
Shenzhen Wisdomlong Technology CO.,LTD |
|
Verified Suppliers
|
|
|
Siemens simadyn D process module pt2g Control Circuit Board 6DD1606-2AB0
Warning
Risk of personal injury and material damage. In potentially
explosive atmospheres, there is a risk of personal injury or damage
to material if you disconnect connectors when the system is in RUN.
In potentially explosive atmospheres, always switch off the power
supply to LOGO! and its components before you disconnect any
connectors.
It is issued with the CE Certificate of Conformity. It is compliant
with VDE 0631 and IEC 61131-2 and interference-proof to EN 55011,
Limit Class B.
Marine certification has been requested.
ABS (American Bureau of Shipping)
BV (Bureau Veritas)
DNV (Det Norske Veritas)
GL (Germanischer Lloyd)
LRS (Lloyds Register of Shipping)
Class NK (Nippon Kaiji Kyokai)
It is therefore suitable for use both in industry and inthe
domestic area.
General guidelines
Please note the following guidelines for the installation
and wiring of your LOGO! :Always ensure that the wiring
of your LOGO! is compliant
with current rules and standards. Also, conformwith all national
and regional regulations when youinstall and operate the devices.
For information on standardsand regulations that apply to your
specific case,
contact your local authorities.
Always use cables with an appropriate conductor crosssectionsfor
the relevant current. You can wire theLOGO! with cable conductor
cross-sections from1.5 mm2 to 2.5 mm2; see Chapter 2.3.
Do not exceed the screw torque of the terminals. Themaximum torque
is: 0.5 N/m, see Chapter 2.3.
Keep the cabling as short as possible. If longer cablesare
necessary, you should use shielded versions. Youshould always route
your cables in pairs: i.e. one neutralconductor plus one phase
conductor or signal line.
Always keep separate:
– The AC wiring
– High-voltage DC circuits with high-frequency switchingcycles
– Low-voltage signal wiring.
Ensure that the wires are installed with an appropriatestrain
relief.
Provide a suitable lightning surge arrester for cablesinstalled in
relevant areas of hazard
SIMILAR PRODUCTS
SIEMENS 6DD16800BB0
SIEMENS 6DD16800AJ0
SIEMENS 6DD16800AH0
SIEMENS 6DD16800AG0
SIEMENS 6DD16800AC2
SIEMENS 6DD16810CA2
SIEMENS 6DD16810EA1
SIEMENS 6DD16810CB2
SIEMENS 6DD16810AG2
SIEMENS 6DD16810AH1
SIEMENS 6DD16810GK0
SIEMENS 6DD16810CD0
SIEMENS 6DD16810AF4
SIEMENS 6DD16810DE1
SIEMENS 6DD16810DD1
SIEMENS 6DD16810EB3
SIEMENS 6DD16810EA0
SIEMENS 6DD16810BF1
SIEMENS 6DD16810BD1
SIEMENS 6DD16810AJ1
SIEMENS 6DD16810AG1
SIEMENS 6DD16810AE2
SIEMENS6DD16810DJ1
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
