|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Eva
Shenzhen Wisdomlong Technology CO.,LTD |
|
Verified Suppliers
|
|
|
IC9445B200AB GE FANUC Limit Switch Lever Watertight Standard Contact 2 Circuits
Product Description
| Nominal Rated Voltage: | 120/240 VAC or 125 VDC |
| Input Voltage Range: | 85 to 264 VAC or 100 to 300 VDC |
| Input Power: | 90 VA with VAC or 50 W with VDC |
| Load Capacity: | 30 Watts |
| Location on Baseplates: | Left most Slot |
| Communication: | RS 485 Serial Port |
LED Indicator
The OK LED indicates module status: ▪ On green indicates normal
operation ▪ Flashing green indicates boot mode or update ▪ Flashing
amber indicates self-diagnostic error ▪ Off indicates no 3.3V
backplane power.
Using the Module in Hazardous Locations
▪ WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY
IMPAIR SUITABILITY FOR CLASS I, DIVISION 2;
▪ WARNING - EXPLOSION HAZARD - WHEN IN HAZARDOUS LOCATIONS, TURN
OFF POWER BEFORE REPLACING OR WIRING MODULES.
▪ WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS
POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE
NONHAZARDOUS.
▪ Equipment labeled with reference to Class I, Div. 2, Groups A, B,
C and D, Hazardous Locations is suitable for use in Class I, Div.
2, Groups A, B, C, D or non-hazardous locations only.
▪ Equipment labeled with reference to Class I, Zone 2, Groups A, B,
C and D, hazardous locations is suitable for use in Class I, Zone
2, Groups A, B, C, D or non-hazardous locations only.
▪ Be sure to read the installation instructions provided with the
module and its terminal assembly. These instructions specify the
use of copper conductors and wire gauge and type requirements.
Company profile:
Shipping:
