Siemens Simadyn SRT 400 6DD1682-0CG0 Chassis With Power Supply 3E INCLUDING CONTROL CARD 0XX84

 Siemens Simadyn SRT 400 6DD1682-0CG0 Chassis With Power Supply 3E INCLUDING CONTROL CARD 0XX84

SIMILAR PRODUCTS

6DD1600-0AE2 SIMADYN D PROCESSOR MODULE PM12 GENERAL APPLICATION 16BI, 16BO .
6DD1600-0AE3 SIMADYN D PM13 CPU-BOARD SETPOINT CASCADE L- AND C-BUS
6DD1600-0AF0 *** SPARE PART*** SIMADYN D PROCESS MODULE PM16 GENERAL APPLICATION 16BIT16MHZ L- AND C-BUS , 16BI AL, 16BO
6DD1600-0AH0 *** SPARE PART*** SIMADYN D PROCESSOR MODULE PM4 32-BIT, GENERAL APPLICATIONS L AND C BUS, 4BI AL.
6DD1600-0AJ0 *** SPARE PART*** SIMADYN D PM5, 32-BIT CPU MODULE WITH BINARY, ABSOLUTE AND INCREMENT. INPUTS, L AND C BUS
6DD1600-0AK0 SIMADYN D PM6, RAPID 64-BIT CPU MODULE WITH BINARY INPUTS, L AND C BUS
6DD1601-0AD1 SIMADYN D DIGITAL CONTR.SYSTEM PROCESSOR MODULE PG11 LINE-COMMUTATED CONVERTERS
6DD1601-0AE0 SIMADYN D, PROCESSOR MODULE PG16 LINE-COMMUTATED CONVERTERS
6DD1602-0AE0 SIMADYN D, PROCESSOR MODULE PS16 SIMOVERT
6DD1606-0AD0 SIMADYN D TECHNOLOGY BOARD T400 FOR 6SE70/71 AND SRT400 32-BIT/32MHZ, 8BI, 2BO, 4BI/BO 5AI, 2AO;2 PULSE ENCODER INPUTS 2 SER. INTERF.+ 1 SSI ENCOD. OR 1 SER. INTERF.+ 2 SSI ENCODERS CONFIGURING WITH D7-SYS 1MB FLASH, 2MB RAM, 32KB EEPROM
6DD1606-0AD1 SIMADYN D TECHNOLOGY BOARD T400 FOR 6SE70/71 AND SRT400 32-BIT/32MHZ, 8BI, 2BO, 4BI/BO 5AI, 2AO;2 PULSE ENCODER INPUTS 2 SER. INTERF.+ 1 SSI ENCOD. OR 1 SER. INTERF.+ 2 SSI ENCODERS CONFIGURING WITH D7-SYS 1MB FLASH, 2MB RAM, 32KB EEPROM
6DD1606-1AA0 SIMADYN D PROCESSOR MODULE PT2 TECHNOLOGY
6DD1606-1AB0 SIMADYN D PROCESSOR MODULE PT2M TECHNOLOGY WITH MAILBOX
6DD1606-1AC0 SIMADYN D, PROCESSOR MODULE PT20 TECHNOLOGY 16 BIT, 20 MHZ L-BUS, 16 BI AL., 8 BI , 16 BO 7 AE , 4AO, 2 SENSING INPUTS
6DD1606-4AA0 SIMADYN D PROCESS MODULE PT32 TECHNOLOGY 32 BIT L- AND C-BUS 4 BI AL, 16 BI, 16 BO, 4 AI 4 AI INTR., 4 AO
6DD1607-0AA0 SIMATIC S7-400, FM 458 APPLICATION MODULE FOR SIMATIC S7-400
6DD1607-0AA1 SIMATIC S7-400, FM458-1 DP APPLICATION MODULE FOR SIMATIC S7-400
6DD1610-0AF0 SIMADYN D DIGITAL CONTR.SYSTEM MEMORY SUBMODULE MS3 256K BYTES EPROM
6DD1610-0AF1 SIMADYN D MEMORY SUBMODULE MS31 256 KBYTES EPROM
6DD1610-0AG0 SIMADYN D MEMORY SUBMODULE MS4 512 KBYTES EPROM, 1 WAIT STATE
6DD1610-0AG1 SIMADYN D MEMORY SUBMODULE MS41 16 BIT, 512KB EPROM,2KB EEPROM
6DD1610-0AH3 SIMATIC TDC MEMORY CARD MC521 2 MB FLASH-EPROM, 8 KB EEPROM
6DD1611-0AD0 SIMADYN D MAILBOX MM11 L- AND C-BUS , EACH 64KB RAM
6DD1611-0AG0 SIMADYN D MAILBOX MM4 , 32BIT L- AND C-BUS , EACH 2MB RAM SYSTEM ERROR SIGNAL OUTPUT
6DD1640-0AC0 SIMADYN D, INPUT OUTPUT MODULE EM11 16BIT , 8BO, 4AI, 4AI INT., 2AO PULSE SENSING
6DD1642-0BC0 SIMADYN D ANALOG OUTPUT MODULE EA12 8AO
6DD1645-0AC0
6DD1645-0AE0 SIMADYN D SIGNAL PROCESSOR MODULE EP3
6DD1648-0AB0 SIMADYN D ES1 SPECIAL BOARD VOLTAGE MONITORING RESET, BUSSTATUS

WORKAROUNDS AND MITIGATIONS
Siemens has identified the following specific workarounds and mitigations that customers can apply to
reduce the risk:
• Disable telnet service on affected devices. Customers should use SSH instead.
• Restrict network access to port 23/tcp of the device.
GENERAL SECURITY RECOMMENDATIONS
As a general security measure, Siemens strongly recommends to protect network access to deviceswith appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemensrecommends to configure the environment according to Siemens’ operational guidelines for Industrial
Security (Download: https://www.siemens.com/cert/operational-guidelines-industrial-security), and tofollow the recommendations in the product manuals.

Additional information on Industrial Security by Siemens

SUMMARY
A vulnerability in the affected devices could allow an unauthenticated attacker with network access to an affected device to perform a denial-of-service.
Siemens is preparing updates and recommends specific countermeasures until patches are available.

OTHER SUPERIOR PRODUCTS