|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Eva
Shenzhen Wisdomlong Technology CO.,LTD |
|
Verified Suppliers
|
|
|
IC200CHS003 GE VersaMax I/O Carrier, Connector Style . A connecting cable (IC200CBL1xxx) and interposing base
I/O Interposing Bases
VersaMax I/O interposing disconnect bases enable the IC200CHS003 to
connect to a wide range of termination bases . The Relay bases
provide additional protection and higher amperage outputs . The
Disconnect bases enables the user to easily disconnect signals, on
a per point bases, from the I/O module .
| IC200CHS003 | IC200CHS101 | IC200CHS102 | IC200CHS111 | |
| Product Name | VersaMax I/O Carrier, Connector Style . A connecting cable (IC200CBL1xxx) and interposing base (IC200CHS011, CHS012, CHS014, CHS015, IC200CHS1xx or IC200CHS2xx) are required . This carrier can be used with all VersaMax I/O modules EXCEPT the following, due to their high isolation requirements: IC200MDL144 Input 240 VAC 4 Point Isolated Module; IC200MDL244 Input 240 VAC 8 Point Isolated Module; IC200MDD850 Mixed 240 VAC Isolated 4 Point / Output Relay 2 .0A Isolated 8 Point Module | Input or Output Interposing Disconnect Style 16 Points . The base has an individual knife-switch disconnect for each signal and common terminal and its corresponding pin on the VersaMax cable connector . Requires IC200CHS003 and a connecting cable IC200CBL1xxx | Expansion Input or Output Interposing Disconnect Style 16 Points . The base has an individual knife-switch disconnect for each signal and common terminal and its corresponding pin on the VersaMax cable connector . Requires a IC200CHS101 main base, can not be directly connected to IC200CHS003 . | I/O Interposing Relay Base (replaceable relays), fused (8 amps, replaceable), 16 points . The relays on these interposing terminals are intended to be controlled with standard 24 VDC 0 .5A VersaMax output modules (IC200MDL740 and IC200MDL750 using IC200CHS003 base and connected by IC200CBL1xxx) . |
| Lifecycle Status | Active | Active | Active | Active |
| Field Termination Type | ntegrated | Non-Integrated | Non-Integrated | Non-Integrated |
| Wiring Termination Style | Connector | Box | Box | Box |
| Removable Terminals Connectors | N/A | No | No | No |
| Input Voltage | N/A | All discrete modules supported except MDL144, 244, 331, 730 and MDD840, 843, 850 . | All discrete modules supported except MDL144, 244, 331, 730 and MDD840, 843, 850 . | 24 VDC from MDL740 and MDL750 |
| Output Voltage | N/A | All discrete modules supported except MDL144, 244, 331, 730 and MDD840, 843, 850 . | All discrete modules supported except MDL144, 244, 331, 730 and MDD840, 843, 850 . | 0-125 VDC, 5/24/125 VDC nominal; 0-265 VAC (47-63 Hz), 120/240 VAC nominal |
| Load Current per Point | N/A | N/A | N/A | 8 .0 A for 5-265 VAC, 2 .0 A for 5-30 VDC, 0 .2 A for 31-125 VDC (Replaceable Fuse) |
| Protection | N/A | N/A | N/A | Replaceable Fuse |
| Points per Common | N/A | N/A | N/A | Isolated Per Point |
| Dimensions (W x H x D) | 66 .8 mm (2 .63 in) x 133 .4 mm (5 .25 in) x 70 mm (2 .75 in), not including the height of the DIN-rail | 115 mm (4 .5 in) x 126 mm (4 .95 in) x 65 mm (2 .6 in), not including the height of the DIN-rail | 115 mm (4 .5 in) x 126 mm (4 .95 in) x 65 mm (2 .6 in), not including the height of the DIN-rail | 253 .7 mm (9 .9 in) x 126 mm (4 .95 in) x 73 mm (2 .8 in), not including the height of the DIN-rail |
| Cables | Requires a IC200CBL1xxx cable | Requires a IC200CBL1xxx cable | N/A | Requires a IC200CBL1xxx cable |
