Shenzhen Wisdomlong Technology CO.,LTD |
Verified Suppliers
|
|
Brand GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc
Manufacturer GE Fanuc (Former); Emerson Automation (Current)
Part Number IC693APU300
Series Series 90-30
Product Description High-Speed Counter (HSC) module
No of input channels Twelve (12) source inputs
No of input channels Twelve (12) positive logic inputs
Product Description High Sped counter module
Input voltage 5 VDC; 10-30 VDC
Input signal voltage 5 VDC; 10VDC - 30 VDC
Maximum Count Rate 80 kiloHertz
Input frequency 8 kHz
Minimum Count Rate 20 kiloHertz
Input count frequency 80 kHz
Output ratings 10 to 30 VDC @ 500 mA maximum; 4.75 to 6 VDC @ 20 mA
maximum
No. of output channels Four (4) Positive Logic outputs
Input/Output Type Positive Logic
No. of Logic Inputs 12
Output voltage range 4.75 VDC - 6 VDC; 10-30 VDC
Maximum count rate up to 200 kHz
Output protection Short circuit protection
Input Voltage Range 5 Volts DC, 10-30 Volts DC
Module operating voltage 5 VDC sourced from the backplane
Current draw 250 mA at 5VDC
No. Logic Outputs 4
CMOS Load Drive Capability Yes
Output Voltage Range 4.7 to 40 Volts DC
Counter modes Up; Down; bi-directional; Differential
LED indicators BOARD OK and CONFIG OK
Compatible applications metering, flowmeter and flow totalizing,
velocity measurement, material handling, motion and process control
applications.
Output Protection 3 Amps Fuse for all points
Output Points Powered by user supplied 5V, or 10 to 30 VDC
Applications supported Turbine flowmeter, Meter proving, Velocity
measurement, Material handling, Motion control, and Process
control.
LED indicators BOARD OK; CONFIG OK
Isolation 250 Volts AC
Product Lifecycle Status Discontinued/Obsolete
Power Consumption 250 mA at 5 Volts DC
Product Lifecycle Status* Discontinued/Obsolete
The IC693APU300 is a High-Speed Counter (HSC) module that belongs
to the Series 90-30 PLC Platform that is formerly produced by GE
Fanuc Automation, however, recently acquired by Emerson Automation.
This HSC module is specially designed for use in a variety of
processes but not limited to Turbine flowmeter, Meter proving,
Velocity measurement, Material handling, Motion Control, and
Process Control. For metering applications, this HSC module can be
used to generate the totalized supplied or received material which
can be a reference of billing and payment or simply for monitoring
consumption and operation efficiency. For motion control, this
module can be used to pair with encoders, accepting high-speed,
low-level voltage signals that represent the position or the amount
of motion that the load has traveled which can be a reference of
control. In Material handling applications, this module can be used
for rapid counting of products to implement accurate sorting of
materials and goods produced. With process control, the module can
be used to measure high-speed Process Variables such as magnetic
speed pickups. The IC693APU300 features Twelve (12) Positive logic
inputs, operating at 5VDC or 10-30 VDC signal voltages. It also has
Four (4) Positive Logic outputs that generate 500 mA at 10-30 VDC
or 20 mA at 4.75 to 6 VDC rated output voltages. This high-speed
counter module has a maximum count rate of 200 kHz and accepts a
signal switching frequency of up to 8 kHz. This module is
categorized as an option module therefore, it can be installed to
any available I/O slots of Series 90-30 baseplates.
The GE IC693APU300 High-Speed Counter Module is a single-slot
counter module from GE Fanuc. It is suitable to use in applications
such as Turbine flowmeter, Meter proving, Velocity measurement,
Material handling, Motion control, and Process control. The main
benefit of this counter module is that it is capable of processing
rapid signal pulses that are rated at up to 80 kiloHertz of
frequency. This high-speed counter module can sense inputs and
outputs as well as count input and output responses without
communicating with the CPU. The IC693APU300 High-Speed Counter
Module can count both up and down and it can count the difference
between 2 changing values. In order to indicate the operating
status and configuration parameter’s status, the module has 2 green
LEDs on its top face.
The IC693APU300 High-Speed Counter Module can be arranged to have 4
identical independent simple counters, 1 complex counter, and 2
identical independent complex counters. Some of the features of
this high-speed counter module include counts per time-based
register for each counter, a removable terminal board for field
wiring, and internal module diagnostics. The power for the module
is drawn from the 5 Volts DC rated Bus of the PLC backplane. The
IC693APU300 High-Speed Counter Module can be installed in any
Series 90-30 baseplate. Never install this module in an enclosure
that is only accessible with the use of tools. This module cannot
be removed or replaced without shutting down the PLC properly. It
can be configured by using the Logicmaster 90-30/20, Hand-Held
Programmer, Logic Developer-PLC, or VersaPro software. This module
can be used in industrial applications which have pulse input rates
that exceed the input capability of the PLC such as meter proving,
material handling, velocity measurement, motion control, and
turbine flow meter applications.
Introduction of Wisdomlong Technology CO.,LTD
The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.
OTHER SUPERIOR PRODUCTS of Wisdomlong Technology CO.,LTD
Yasakawa Motor, Driver SG- |
Mitsubishi Motor HC-,HA- |
Westinghouse Modules 1C-,5X- |
Emerson VE-,KJ- |
Honeywell TC-,TK- |
GE Modules IC - |
Yokogawa transmitter EJA- |
Our brands of Wisdomlong Technology CO.,LTD
Terms
1. We ships worldwide and accepts T/T and Paypal.
2. All items are subject to availability and passing our QA testing
and inspection.
3. Turnaround Time:
Standard order processing is 1-2 business days plus shipping method
chosen.
Rush and off-hours service available for an additional fee.
Shipping
1. We ship worldwid use UPS, FedEx, DHL, or Truck when needed.
2. Call to use a shipping service other than the ones listed.
3. International Customers are responsible for all Customs fees,
VAT, and other fees applied by their respective countries.
FAQ
1. Why choose us?
* Passionate, experienced and highly-educated R & D and sales team;
* Reasonable price and reliable products, skillful and careful assembly;
* Strict quality assurance and quick aftersales service;
* Lifetime technical support, can come with customized setting.
2. How about your product warranty?
* We offer one-year warranty upon delivery.
3. How about the aftersales support?
* We will offer on-time response for online enquiries from oversea users. Please feel free contact us by email, WhatsApp, WeChat and SKYPE.
Conact Person:
Lumi
Phone:+86-14775061220
WhatsApp:+86-14775061220
Wechat:forever_12-20_
Tel: +86-755-25020661
Fax: +86-755-25020662
WISDOMLONG TECHNOLOGY CO.,LIMITED
Email: weitianlong23e@163.com
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu
District,Shenzhen,518001,China