Industrial Servo Motor Yaskawa SGM-08A312C AC Servo Motor 750W 200V 3000RPM

Item Description

Manufactured by YASKAWA ELECTRIC

• YASKAWA ELECTRIC
• SGM-08A312C
• SGM-08A312C
• SERVO MOTOR.
• 750W
• 200V
• 4.4A
• 2.39 N.m
• Ins B
• 3000r/min
• Single-phaseType
• Efficiency:IE
• High Frequency
• AVAILABLE
• REBUILT SURPLUS
• NEW SURPLUS
• REPAIR YOURS
• 24-48 HOUR RUSH REPAIR
• 2 - 15 DAY REPAIR
• 2 YEAR RADWELL WARRANTY

NOTE: It is beyond the scope of this document to program the V1000 drive for network communication control. Please refer to the programming manual for this selection.

• Compact and programmable

• EMC tested. CE-marked

• Built-in RS232/RS485 Interface

• Models with sequential program execution

• Simple programming using MotoWare

• Facilities for graphic monitoring

• Electronic gearing with high resolution

• Use FLASH-PROM, can be re-programmed

• Absolute or relative positioning • Programmable velocity profiles

• Driver stages of 6 and 12A • Digital control loop

• Automatic zero-point seek

• 11 inputs, 8 outputs

• Current and voltage overload protection

• Short-circuit and thermal overload protection

• End-of-travel limit inputs

Parameter Default Value Description Comments b1-01 1 Reference Source Speed Control Method 0 = Digital Operator (Adjust Motor Speed from keypad) 1

= Terminals (Speed Pot. / 0 – 10V / 4—20mA) b1-02 1 Run Source / Start/Stop Control Method 0 = Digital Operator (Start/Stop motor from keypad) 1

= Terminals (Start/Stop using external contact / switch) b1-03 1 Stop Method Selection 0 = Ramp to stop (Motor ramps down at stop command) 1

= Coast to stop (Motor freewheels at stop command) b1-04 0 Reverse Operation 0 = Allow motor to run in reverse direction 1

= Reverse direction prohibited C1-01 10.0 sec. Acceleration Time The time it takes to ramp up from 0 to maximum motor speed. C1-02 10.0 sec. Deceleration Time The time it takes to ramp down from maximum motor speed to 0. C6-01 1 Normal / Heavy Duty 0

=Normal Duty (Use for fan and pump applications) 1

= Heavy Duty (Use for conveyor, mixer, applications) d1-01 0.00 Hz Frequency Reference Frequency setting when speed is set from the keypad. d2-01 100.0 % Frequency Upper Limit Maximum motor speed allowed (e.g. 100 % = Max rpm) d2-02 0.0 % Frequency Lower Limit Minimum motor speed allowed (e.g. 100 % = Max rpm) E2-01 * Motor Rated Current Motor nameplate current L1-01 1 Motor Overload Selection 0 = Disabled 1

= Standard Fan Cooled Motor 2 = Standard Blower Cooled Motor 3

= Vector Duty Motor L1-02 1.0 min Motor Overload Time Sets the motor thermal overload protection time.

OTHER SUPERIOR PRODUCTS