Baoji Hengtong Electronics Co., LTD |
Verified Suppliers
|
|
BPHT24-IX Pressure Transmitter
Introduction of flush diaphragm Industrial pressure sensor transmitter:
The BPHT24 - IX flat Flush diaphragm industrial pressure sensor transmitter senses the pressure signal and uses an integrated circuit to convert it into a standard output signal for processing. This pressure transmitter is primarily utilized in environments with high sanitary standards, such as the food and medical industries, to ensure that the performance of the medium is not compromised by contamination during the pressure measurement process. It can be paired with an LCD or LED field display for real-time monitoring of the field's pressure situation.
Product Features of flush diaphragm industrial pressure sensor transmitter:
1. Various pressure interface options.
2. Designed for hygienic applications to prevent medium scaling.
3. High accuracy with a fully stainless steel structure.
4. Easy to clean,display.
Applications of flush diaphragm industrial pressure sensor transmitter:
1. Suitable for measuring non-corrosive gases and liquids with
316L.
2. Ideal for environmental protection and chemical industries.
3. Used in the marine and aviation industries.
4. Well-suited for use in the medical, biopharmaceutical, and food
hygiene industries.
Performance Parameters of flush diaphragm industrial pressure sensor transmitter: | |
Measurement Range | 0~10Kpa…~20MPa |
Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
Overload | ≤ 1.5 times of the rated range |
Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
Repeatability& Hysteresis | 0.02%F.S(Typ.) 0.05%F.S(Max.) |
Long-Term Stability | ±0.1%F.S/Year(Typ.) ±0.2%F.S/Year(Max.) |
Zero Point Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
Full Scale Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
Frequency Response | 2.4Khz |
Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
Operating Temperature | -20ºC~80ºC |
Storage Temperature | -40ºC~120ºC |
Vibration | 10g,55Hz ~ 2kHz |
Housing Material | 304,316L |
Diaphragm Material | 316L |
Insulation Resistance | 100MΩ 100VDC |
Explosion-proof Rating | Ex ia IIC T6 Ga |
Protection Rating | IP65 |
O-Ring Seal | Fluoro rubber |
Weight | ~0.2kg |
Output Signal | Supply Voltage | Output Type |
4~20mA | 12~30VDC | 2/3/4 wire |
0~10/20mA | 3 wire | |
0/1~5V | ||
0/1~10V | ||
0.5~4.5V | 5VDC | |
RS485 Communication Protocol | 3.6~30V / Battery | 4 wire |
Ordering tips |
1. When selecting the product, please ensure that the tested medium
is compatible with the material in contact with the product.
2. When placing an order, please note that explosion-proof products
do not include digital display heads.
3. When ordering a transmitter with LCD or LED display head, the
power supply of the transmitter should be no less than 20VDC.
4. To ensure reliable operation of the product, it is recommended
to install lightning protection devices on site and ensure proper
grounding of both the product and power supply.
5. The rated operating temperature range of fluorine rubber O-rings
is -20℃~ 250℃. If the operating temperature of the product falls
below -20 ° C, EPDM O-rings should be selected instead.
6. Cable without insulation by default; if necessary, there are
three types of materials to choose from. In absence of specific
instructions, polyethylene cable materials will be used. Please
specify any alternative cable material required in your order form.
7.In case special requirements such as strong vibration, sudden
impact force or intense electromagnetic or RF interference exist,
please inform us and indicate this in your order.
Order Guide | ||||||||
BPHT24 | Pressure Transmitter | |||||||
Code | Outline Construction | |||||||
IX | Display Pressure Transmitter | IIC/III | Industrial General/ Display Pressure Transmitter | |||||
T | High-temperature resistant Pressure Transmitter | |||||||
Measurement Range | 0~35Kpa…~20MPa | |||||||
(0-X)Kpa or MPa | X: Indicates the Actual Measuring Range | |||||||
Code | Power Supply | |||||||
D1 | 24VDC | |||||||
D2 | 5VDC | |||||||
D3 | Other | |||||||
Code | Output Signal | |||||||
S1 | 4~20mADC | S5 | 0~20mADC | |||||
S2 | 1~5VDC | S6 | 0~10VDC | |||||
S3 | 0~5VDC | S7 | 0.5~4.5VDC | |||||
S4 | 0~10mADC | |||||||
Code | Pressure Connection | |||||||
J1 | M20×1.5 | |||||||
J2 | G1/2 | |||||||
J3 | G1/4 | |||||||
J4 | 7/16-20UNF | |||||||
J5 | Other | |||||||
Code | Electrical Connection | |||||||
B1 | Hirschmann | |||||||
B2 | PG7 Plug | |||||||
B3 | Sealed Cable Output | |||||||
B4 | 2088 Industrial Casing | |||||||
B5 | 2088 Industrial Casing with Display | |||||||
B6 | Other | |||||||
Code | Pressure Type | |||||||
G | Gauge Pressure | |||||||
A | Absolute Pressure | |||||||
S | Sealed Reference Pressure |
Q&A
Q1:Areyou manufactrade company?
A1:We are manufactrader with more than 29 years of experience.
Q2:Customized Product
A2:We provide OEM and Custom-Design services.
Q3:Quality Quarantee
A3:Our products have a limited 12 to 18 months warranty from shipment date to the original purchaser.Hengtong will replace or repair defective products free of charge.This warranty does not apply to any units have been modified,misused,neglected.
Q4:Shipment&packing
A4:Products are generally shipped by international Express including UPS,FedEx,DHL and INT for freight prepaid,also can use your shipment account to collect,Standard export packing,including inspection certification.
Q5:Contact US
A5:We have an active and experienced sales team to serve you on technical question and business issue.Just leave us message or click the Online Service.