|
[China]
Trade Verify
Address: 5F, Building D South, Jinshenghui Science Park, No. 3, Dafu Road, Fucheng Street, Guanlan, Longhua District, Shenzhen, China
Contact name:Michelle Guo
E-link China Technology Co.,LTD |
|
Verified Suppliers
|
|
|
10/100/1000Mbps 48V 24W POE Injector With PoE Power Status Cord
10/100/1000Mbps 48V 24W POE Injector with Power Cord
Advantages:
► Output Voltage: 48VDC @ 0.5A
► Storage Temperature: -20C to +70 deg C
► Operating Humidity: 5% to 95% non-condensing
► Input Voltage: 90-260VAC @ 47-63Hz
► Input Current: 0.3A @ 120VAC, 0.2A @230VAC
► Efficiency: 70+%
► Output Ripple: 1% Max
► Switching Frequency: 200kHz
► Line Regulation: +/- 0.5%
► Load Regulation: +/- 1%
► Operating Temperature: -10C to +50 deg C
► Remotely power Equipment Through CAT 5/6 Cable up to 100m (328ft).
► Short Circuit, Over Current and Over Voltage Protection.
Specifications
| Ethernet | |
| Standards: | IEEE 802.3 10Base-T Ethernet |
| IEEE 802.3u 100Base-TX Fast Ethernet | |
| IEEE 802.3ab 1000Base-T Gigabit Ethernet | |
| Processing Type: | Forward |
| Half-duplex, Full-duplex | |
| Forward Filter Rate: | 1,488,000pps (1000Mbps) |
| Cabling: | 10/100/1000Base-T: Cat5 or above |
| Maximum Distance: | PoE (24W): 2-pair UTP Cat. 3, 4, 5, up to 100m (328ft) |
| Connector: | LAN: 1 x RJ-45 STP, “Data” Input Port POE: 1 x RJ-45 STP, “Data + Power” Output Port AC Connector: 1 x AC Input power socket, IEC-60320-C15 |
| Environmental | |
| Operating Temperature: | -10°C to 50°C (14°F to 122°F) |
| Storage Temperature: | -20°C to 70°C (-4°F to 158°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| MTBF: | >200,000hrs |
| Electrical and Mechanical | |
| Input Voltage Range: | 90-260VAC @ 47-63Hz. |
| Output Voltage: | DC 48-50V, 0.5A |
| Power Consumption: | 24 watts max. |
| PoE (Power over Ethernet) | |
| Port: | RJ45 |
| Power Pin Assignment | Data provide over pairs 1/2(+) and 3/6(-) Power over spare pairs 4/5(+) and 7/8(-) |
| PoE Power Output | DC 48V-50V/324-watt PoE via 2-pairs |
| LED Indicators | |
| Power: | Power Status |
| PoE: | PoE Status |
| Dimensions (W×D×H): | 84 x 43 x 31mm |
| Weight: | 0.25Kg |
| Casing: | Plastic Case |
| Mounting Options: | Desktop |
| Regulatory Approvals | |
| ISO9001 | |
| FCC part 15, Class A | |
| EN55022:2006+A1: 2007 Class A | |
| Surge Protection: | |
| RJ45: 1KV | |
| Power: 500W | |
| ESD: 4KV/8KV | |
LNK-PSE4824G 24W – 48V Gigabit PoE Injector is a long-distance driving, fast network performing, strong PoE Output midspan. It is a single port indoor PoE injector that can provide up to 24W.
The midspans are ideal to power 802.11 access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients and other power Ethernet end terminals with 24W of power. With plug and-play installation, they are easy and cost effective to implement leveraging existing Ethernet infrastructure while at the same time providing the assurance of a future proof network.
Ordering Information
| Model | Description |
| LNK-PSE4824G | 10/100/1000Mbps 48V 24W POE Injector with Power Cord |
