Home Companies Wuxi Wondery Industry Equipment Co., Ltd

90KW 2 Chamber Industrial Gravity Casting Metal Melting Induction Furnace For Copper

Wuxi Wondery Industry Equipment Co., Ltd

Contact Us

[China] country

Trade Verify

Address: Shengang Metropolitan Plaza, Xinwu District, Wuxi, China

Contact name:Mrs. Zhang

Inquir Now

Wuxi Wondery Industry Equipment Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

90KW 2 Chamber Industrial Gravity Casting Metal Melting Induction Furnace For Copper

Country/Region china
City & Province wuxi
Categories Boilers
InquireNow

Product Details

Industrial Gravity Casting Metal Melting Induction Furnace for Copper

 

1. Overview

The 90KW gravity casting furnace adopts a double melting groove design and a double induction body structure.

The advantages of this structure are that it balances the temperature of the melting groove and each part of the furnace

to achieve energy saving effects, and increases the range of electromagnetic stirring to make the distribution of each

element in the furnace more uniform. The purpose of the gravity casting furnace: melting copper, bronze, brass and

other copper alloys for smelting and heat preservation.

 

2. Technical Parameters

90KW gravity casting copper melting furnace technical parameters

No.NameUnitData
1Minimum capacityT0.1
2Rated total capacityT1.2(Can be increased or decreased according to customer requirements)
3Rated PowerKW90
4Inductor rated voltageV380
5Sensor Phase 3
6Sensor frequencyHz50
7Melting rateTon/hour0.3
8Insulation powerKW50
9Rated working temperature1250
10Power factor 

0.45~0.5(before compensation)

0.9~1(after compensation)

11Cooling water pressurePa(2~3) × 105
12Cooling water consumptionTon/hour

7 (Induction coil: 3)

(Water cooling jacket: 4)

 

3. Working Principle and Main Structure

3.1 This product is designed using the principle of electromagnetic induction.

When an AC voltage is applied to the induction coil, an alternating magnetic flux is generated. The magnetic flux forms a

closed magnetic circuit through the iron core. This alternating magnetic flux induces an electromotive force and a secondary

current in the molten groove. This current passes through the resistance of the metal charge and converts electrical energy

into thermal energy, which melts the metal in the molten groove.

3.2 This product consists of a furnace body, a furnace frame, an induction body, an electric furnace cooling system, an electrical

control cabinet, etc.

Electric furnace voltage range: 90V, 120V, 150V, 180V, 210V, 250V, 300V, 380V.

3.3 The gravity pouring electric copper melting furnace adopts a vertical "mouth" iron core induction structure. The shell is made of

rolled and welded steel plates, and the molten pool is made of refractory bricks after the insulation material and refractory material

are tied together.

3.4 The induction body consists of two inductors, two iron cores, and two melting grooves. The induction body shell is composed

of refractory knotted material and water cooling jacket. The inductor is water-cooled: in order to facilitate the removal of refractory

materials and reduce the power loss of the induction body shell, the induction shell is composed of two halves, with insulating

material in the middle. The induction body shell is based on the upper flange surface when assembled.

3.5 During the smelting process, the inlet water temperature is required to be no higher than 35℃, the outlet water temperature

is required to be higher than 55℃, and the water flow rate should be measured frequently. If the water flow rate is lower than

the required level, the scale should be cleaned.

3.6 This industrial metal melting furnace requires that the cooling water quality should meet the following requirements: pH value

is within the range of 7~8, hardness is not greater than 7, and the total content of suspended matter and dissolved solids does not

exceed 10, so as to avoid scaling of cooling water and blockage of water channels.

 

 

5. Scope of Supply

No.NameQ’tyRemark
1Gravity casting furnace shell1setStress relief
2Refractory Materials1setFor single furnace construction
3Stainless steel water jacket2pcs1Cr18Ni9Ti (321)
4Induction coil2pcs 
5Induction core2pcsImported from Japan, Z10
6Melt channel2pcsAlloy Copper
745KW electrical cabinet2pcsThree-phase balanced, dry type

Hot Products

Industrial Gravity Casting Metal Melting Induction Furnace for Copper 1. Overview The 90KW gravity ...
160KW 2 Chamber Gravity Casting Copper Metal Melting Industrial Induction Furnace for Copper Scraps ...
Continuous Electrical Heating Fastening Parts Screw Mesh Belt Furnace 80800 500 – 650 kg per hour 1...
Customized 185 Degree Celcius Aluminum Alloy Aging Heat Treatment Furnace 1.Application Aluminum ...
1400×1400×1100 mm Drop Bottom Fast 650 Degree Celcius Aluminum T6 Heat Treatment Furnace Quenching ...
Customized 3.5 *1.5 * 1.2 Electrical Resistance T4 Aging Heat Treatment Furnace for Aluminum Parts ...