Active Member
|
[China]
Address: No. 15, Tianshun Industrial Park, Huaiyin District, Jinan, Shandong, China (Mainland)
Contact name:Zhu
Jinan Qihang CNC Equipment Co., Ltd. |
|
|
manual operate 12x200mm copper busbar punching bending and cutting machine
Specifications:
This is a professional design of a combination of multiple functions, perfect design, avoid manpower waste and saving working hours, the machine is easy to operate highly improve the working effency. The manual control directional valve can clearly deploy the functions of each working machine, and foot switch can be operated by same person. The whole set of equipment includes electric hydraulic pump, cutting machine, punching machine and bending machine.
1. overall modeling color bright, surface baking paint, and the
phosphoric acid skin mold antirust treatment, wear-resistant and
impact.
2. mirror surface of the working face, the desktop through grinding
and chromium plating, presenting a precise and smooth working face.
3. Quartet valve control switch precision guide, correct use of
punching machine, curved plate tool, cutting tool and hydraulic
pressure embossing tool position.
4. safe and solid electric pump switch, which can control and
return oil.
5. design of copper scrap integrated bag and opened his mouth and a
chip outlet, the slide type can be cut, wear a copper scrap, not
scattered and messy everywhere.
The bottom of the 6. product is equipped with a pulley, and the
pulley is equipped with a foot switch so that the operator can move
to the best work site and fix the product.
7. for the convenience of the operator, the product add a tool
cabinet in the design, so that the tool storage, avoid misplacing
and loss of tools.
| Name | Portable busbar machine(Combined type) |
| Number | DHY-200 |
| Function | punching |
| type | CH-70 |
| Maximum pressure of punching | 36 tons |
| Maximum thickness of punching | Copper:12mm, steel:10mm |
| Mould parameter | 3/8"(ф10.5mm2),1/2"(ф13.8mm2),5/8"(ф17.5mm2),3/4"(ф20.5mm2) |
| Weight | 37KG |
| Oversize(cm) | 27*39*16 |
| Type | CWC-200 |
| Function | shearing |
| Maximum pressure of shearing | 30 ton |
| Maximum thickness of shearing | Copper:12mm, steel:10mm |
| Maximum width of shearing | 200mm |
| weight | 26KG |
| Oversize(cm) | 33*44*20 |
| Type | CB-200A |
| function | Horizontal bend |
| Maximum pressure of bending | 30 ton |
| Maximum thickness of bending | Copper:12mm, steel:10mm |
| Maximum width of bending | 200mm |
| weight | 29KG |
| Oversize(cm) | 29*38*20 |
| Name | Electric pump |
| Maximum pressure | 70Mpa |
| minimum | 7 Mpa |
| power | 750W |
| rate | 50HZ/60Hz |
| Oil storage | 7L |
| High-Pressure flow | 0.9L/min |
| Low-Pressure flow | 5.0L/min |
| voltage | 220V |
| speed | 1400r/min |
| Oil type | Antiwear hydraulic oil |
| Oversize(cm) | 36*43*28 |
| weight | 24KG |
| whole dimension | 1200mmx1300mmx800mm |
| Total weight | 210KG |
Main characteristic:
The punching machine have hand operator and footer pedal two operation method, when you punching material just step on the footer pedal the machine will running, once stop step the footer pedal the machine will stop, it is very easy to operator.
CH-60 use 750W electric pump, the pump is 100% original, compare with others our machine with long service time, becuase the pump is good enough, the solenoid valve of the pump is high quality.
Before use the machine please add NO.20-NO32 hydraulic oil first.
Operation video on youtube:
https://youtu.be/o0BGeXhxcWM
