Home Companies JDR Diamond Tools Co.,Ltd

2000 - 40000 RPM Abrasive Nylon Brush Soft Stone Processing With Archaistic Effect

JDR Diamond Tools Co.,Ltd
Active Member

Contact Us

[China] country

Address: Xinyuan,Huangtang,Xiake,Jiangyin, Wuxi

Contact name:Henry Yao

Inquir Now

JDR Diamond Tools Co.,Ltd

2000 - 40000 RPM Abrasive Nylon Brush Soft Stone Processing With Archaistic Effect

Country/Region china
City & Province wuxi jiangsu
InquireNow

Product Details

1. 2000 - 40000 RPM Abrasive Nylon Brush Soft Stone Processing With Archaistic Effect

2.  Description of abrasive antique brushes

   a)  Abrasive Brush are used in marble, granite, limestone, slate, sandstone, travertine and so on

   b)  Recommended 2,000 - 4,0000 RPM

   c)  By wet grinding the surface of the stone, it could get the archaistic effect.

   e)  Brushes remove the “soft” material creating a beautiful texture while enhancing the natural color in the stone

  f)  For aging and texturizing surfaces

  g) The speed of machine(auto polishing machine, arm polishing machine) isn't so high.

  h)  The pressure is low as soon as possible.

3.  Specification:

SIZEGRIT
105*90*80*4324#,36,46#,60#,80#,120#,180#,240#,320#,500#,800#

4.  How to use our Antiqued finish brush

Starting from a saw cut or polished surface:

Begin with the metal diamond abrasive, make sure to remove all cutting marks, if any cut marks / drags were left on the stone, you will be able to see them in the finish. Then follow with the  wire brush.

For Granites and hard type stones – The Diamond wire brush will speed the process; these are very aggressive brushes. Diamond wire brushes are available in (36, 46, 60) all 3 types are not required in a sequence, it’s all depending the stones hardness and to the effect desired in the end finish. But in most cases with the Diamond wire brushes on granite, the more cycles, the deeper the texture.

For Marbles the Diamond wire brushes may be too aggressive,Now use the 36 Antique abrasive brushes,this step will determine the finish look,Follow with the 46,60#,80#,120#,180#,240#,320#,At this stage the slab will look medium colored like a honed look and should have good texture.Pressure on Brushes should be low, maybe 1/2 bar or less, light. Pressure will do nothing but wear the brushes faster.

 

Hot Products

1. CNC Diamond & CBN Grinding wheels Combination for HSS, tungsten carbide tools making 2. Features ...
1. Electroplated diamond cnc finger bits for marble and soft stone 2. Features and ApplicationElectr...
1. 110MM granite marble Round abrasive silicon carbide antique brush 2. Abrasive Brush are used in ...
1. Frankfurt Antique brush,hand grinding and polishing for kinds of granite,marble stone 2. ...
1. 2000 - 40000 RPM Abrasive Nylon Brush Soft Stone Processing With Archaistic Effect 2. Description ...
1. Plastic Backed round Antique wire Brushes for Grinding and polishing soft Stone 2. Description of ...